[mrtg] Re: Airflow w/ Netbotz

[Chirhart, Brian]

Steve "Bonez" from Netbotz answered my question...  It's what I figured -

>You cannot graph airflow via MRTG...  the value for airflow reading uses an
>algorithm based on the current airflow sensor voltage, and temp sensor
>reading...

>thx..

>steve...
>support at netbotz.com

Brian -

-----Original Message-----
From: Chirhart, Brian 
Sent: Tuesday, August 28, 2001 17:57 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Airflow w/ Netbotz
Importance: High



Anyone graph airflow on a Netbotz device notice that the numbers are all
wrong?  I figure since their temp, humidity and airflow sensor is meshed in
to one sensor the Oid 1.3.6.1.4.1.5528.30.10.3.0 is actually giving you the
value that it reports to it's processor which then chews on the numbers
giving you correct readings.  Thus the Oid is giving you this number and not
the actual airflow reading.  Has anyone got around this and how?

Brian Chirhart


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi