[mrtg] Re: Multiple devices - One Graph - Many Colours

[David Sawyer]

> Mike Koch wrote:
> >The bad news is that RRDTOOL is not as straightforward as MRTG.... good
> >luck!
> 
> But the good news is that you can use MRTG to poll the devices, stash the
> information in multiple rrd's, then create one graph that gets the
> information from the multiple rrd's, making it somewhat easier than
> starting
> from scratch with your own poller and rrd design.
> 
If you put all the same devices in the same config file and use
MRTG + RRDTool + routers.cgi you will be able to view all inbound
traffic on a single graph and outbound traffic on a different graph.
But you won't be able to see inbound and outbound on the same graph.

Click on the link below and about 2/3s of the way down the page
you will see an example of routers.cgi
www.geocities.com/mrtg_daemon



----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi