[mrtg] Re: Wrong values in ATM PVC monitoring for Cisco Router

Joe Strause strause at ceni.com
Tue Dec 18 17:27:21 MET 2001


I don't have any compression at all...........


-----Original Message-----
From: Sawyer, David [mailto:david.sawyer at uk.mckhboc.com]
Sent: Tuesday, December 18, 2001 9:42 AM
To: 'Joe Strause'; Richard Cotrina
Cc: mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Re: Wrong values in ATM PVC monitoring for Cisco Router

Do your links have compression, if so the non-Cisco device may count
compressed data, but the Cisco device may count un-compressed data.

It's just a thought...


-----Original Message-----
From: Joe Strause [mailto:strause at ceni.com]
Sent: 18 December 2001 13:42
To: Richard Cotrina
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Wrong values in ATM PVC monitoring for Cisco Router



Richard,

# -- snip

It always shows the same values as the Shasta ports but
its always 2 megs less at the Cisco end. The only
explanation I could ever come up with is that the Shasta pumps out a lot of
"management" traffic that the Cisco drops before it
records he SNMP values.
I don't know if this helpful at all, but I'd curious to see what you find
out.

Thanks,
Joe Strause

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Richard Cotrina
Sent: Monday, December 17, 2001 12:37 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Wrong values in ATM PVC monitoring for Cisco Router


Hi all :

# -- snip

However, my client has started his monitoring in the equipment that is
connected to the PVC where I am getting the graphs. He is using MRTG too ,
the same version than me ( 2.9.17 ) and the only difference between us is
the type of equipment ( he is using a Nortel Router ), and we got different
values of Current in/Out bits per second in the traffic values.

The matter is that sometimes the difference is big enough ( ~ 2Mbps ) and we
doubt if the values we are getting are correct. Always the values I got in
the Cisco Router is lower than my client is getting in his Norftel Router
( Shasta BSN 5000 ). Of course I've considered that the output traffic in my
Router is the input traffic in my client's router and viceversa.

# -- snip


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list