[mrtg] Re: cfgmaker on a cisco 3500 cluster

[Richard Lefebvre]

I got mrtg 2.9.4 and changed the mrtg.cfg file to add another cluster
member and it works. So the break point can be reduced at between
2.9.4 and 2.9.7

Thank you for your help, I should be able build a cfg file from
there.

Rick

On Feb 13,  2:24pm, Daniel J McDonald wrote:
> Subject: [mrtg] Re: cfgmaker on a cisco 3500 cluster
>
> Sorry to follow up to myself, but I wrote:
>
> > Within the mrtg cfg file, you can encode this as
> > 1:public\@es1 at 192.168.1.1
>
> I based that on the release notes for 2.9.0pre13.  That syntax does not
> appear to work in 2.9.7.  I did check 2.9.0pre33 (happen to have it still
> running at a client) and found that cfgmaker was able to walk the mib fine,
> but generated a config file that would not work.  Once the config file was
> modified to use the syntax above it worked fine.
>
> So, something has changed between 2.9.0pre33 and 2.9.7 to cause this to
> break.
>
> Daniel J McDonald - CCIE 2495, CNX
> Principal Network Specialist
> Digicon Technologies
> http://www.digicontech.com
> dmcdonald at digicontech.com
>
> Digicon - A Cisco Systems Partner, Silver Certified.
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>-- End of excerpt from Daniel J McDonald



-- 
Richard Lefebvre, Sys-admin, CERCA, (514)369-5224            "Don't Panic"
Richard.Lefebvre(@AROBAS)cerca(.POINT)umontreal(.POINT)ca       -- THGTTG
http://www.CERCA.UMontreal.CA/~rick/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi