[mrtg] Re: Router memory, temperature

[David Sawyer]

Hmmm...did you cut and paste your question from a previous post?

Try these...

envTestPt1Descr = 1.3.6.1.4.1.9.2.1.78
envTestPt1Measure = 1.3.6.1.4.1.9.2.1.79
## Typically ambient air or the temperature of air entering the router

envTestPt2Descr = 1.3.6.1.4.1.9.2.1.80
envTestPt2Measure = 1.3.6.1.4.1.9.2.1.81
## Typically airflow or the temperature of air leaving the router

envTestPt3Descr = 1.3.6.1.4.1.9.2.1.82
envTestPt3Measure = 1.3.6.1.4.1.9.2.1.83
## Typically the value in millivolts of the +5v supply

envTestPt4Descr = 1.3.6.1.4.1.9.2.1.84
envTestPt4Measure = 1.3.6.1.4.1.9.2.1.85
## Typically the value in millivolts of the +12v supply

envTestPt5Descr = 1.3.6.1.4.1.9.2.1.86
envTestPt5Measure = 1.3.6.1.4.1.9.2.1.87
## Typically the value in millivolts of the -12v supply

envTestPt6Descr = 1.3.6.1.4.1.9.2.1.88
envTestPt6Measure = 1.3.6.1.4.1.9.2.1.89
## Typically the value in millivolts of the -5v supply

avgBusy1 = 1.3.6.1.4.1.9.2.1.57	(CPU usage)
avgBusy5 = 1.3.6.1.4.1.9.2.1.58	(CPU usage)
locIfInBitsSec = 1.3.6.1.4.1.9.2.2.1.1.6
locIfInPktsSec = 1.3.6.1.4.1.9.2.2.1.1.7
locIfOutBitsSec = 1.3.6.1.4.1.9.2.2.1.1.8
locIfOutPktsSec = 1.3.6.1.4.1.9.2.2.1.1.9
locIfInRunts = 1.3.6.1.4.1.9.2.2.1.1.10
locIfInGiants = 1.3.6.1.4.1.9.2.2.1.1.11
locIfInCRC = 1.3.6.1.4.1.9.2.2.1.1.12
locIfInFrame = 1.3.6.1.4.1.9.2.2.1.1.13
locIfInOverrun = 1.3.6.1.4.1.9.2.2.1.1.14
locIfInIgnored = 1.3.6.1.4.1.9.2.2.1.1.15
locIfInAbort = 1.3.6.1.4.1.9.2.2.1.1.16
locIfResets = 1.3.6.1.4.1.9.2.2.1.1.17
locIfRestarts = 1.3.6.1.4.1.9.2.2.1.1.18
locIfKeep = 1.3.6.1.4.1.9.2.2.1.1.19
locIfReason = 1.3.6.1.4.1.9.2.2.1.1.20
locIfCarTrans = 1.3.6.1.4.1.9.2.2.1.1.21
locIfReliab = 1.3.6.1.4.1.9.2.2.1.1.22
locIfDelay = 1.3.6.1.4.1.9.2.2.1.1.23
locIfLoad = 1.3.6.1.4.1.9.2.2.1.1.24 (if you use this, don't forget to set
the 'bandwidth' command on the router interface)
locIfCollisions = 1.3.6.1.4.1.9.2.2.1.1.25
locIfInputQueueDrops = 1.3.6.1.4.1.9.2.2.1.1.26
locIfOutputQueueDrops = 1.3.6.1.4.1.9.2.2.1.1.27



> -----Original Message-----
> From:	Maged Ezzat [SMTP:magedez at link.net]
> Sent:	Monday, February 26, 2001 10:15 AM
> To:	mrtg
> Subject:	[mrtg] Router memory, temperature 
> 
> Dears
> 
> i need to monitor Router memory, temperature free buffers, traffic that
> matches CAR criteria, number of people logged in to the vty ports,
> probably even the number of seconds since the last configuration change,
> 
> so please give me the CFG files for these.
> 
> Thx & Regards,
> Maged Ezzat.
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 
----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi