[mrtg] Cisco800 problem -> noSuchName

Hemling, Uwe u.hemling at dxsconsult.com
Thu Jan 4 14:35:20 MET 2001


I get no information about a unnumbered IP connection on a Cisco800 with a
permanent line to a provider.
What can I do ??????

cfgmaker file:
# Created by 
# cfgmaker public at 192.168.64.254 --global 'WorkDir: d:\inetpub\wwwroot\mrtg'
--output mrtgint.cfg --ifref=nr --no-down

WorkDir: d:\inetpub\wwwroot\mrtg

######################################################################
# System: 800Delta
# Description: Cisco Internetwork Operating System Software 
#          IOS (tm) C800 Software (C800-G3N-MW), Version 12.0(1)XB1,
RELEASE SOFTWARE (fc1) 
#          TAC:Home:SW:IOS:Specials for info
#          Copyright (c) 1986-1998 by cisco Systems, Inc.
#          Compiled Wed 30-Dec-98 11:11 by ayeh
# Contact: 
# Location: 
######################################################################


### Interface 1 >> Descr: 'BRI0' | Name: 'BR0' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.1)
###     SNMPv1_Session (remote host: "192.168.64.254" [192.168.64.254].161)
###                       community: "public"
###                      request ID: 1958187835
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
# 
# Target[192.168.64.254_1]: 1:public at 192.168.64.254
# SetEnv[192.168.64.254_1]: MRTG_INT_IP="" MRTG_INT_DESCR="BRI0"
# MaxBytes[192.168.64.254_1]: 8000
# Title[192.168.64.254_1]: Traffic Analysis for 1 -- 800Delta
# PageTop[192.168.64.254_1]: <H1>Traffic Analysis for 1 -- 800Delta</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>800Delta in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>BRI0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>AT&T DS0 Point (64 Kbps) (81)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>BR0</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>8000.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 2 >> Descr: 'BRI0:1' | Name: 'BR0:1' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.2)
###     SNMPv1_Session (remote host: "192.168.64.254" [192.168.64.254].161)
###                       community: "public"
###                      request ID: 1958187836
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
# 
# Target[192.168.64.254_2]: 2:public at 192.168.64.254
# SetEnv[192.168.64.254_2]: MRTG_INT_IP="" MRTG_INT_DESCR="BRI0:1"
# MaxBytes[192.168.64.254_2]: 8000
# Title[192.168.64.254_2]: Traffic Analysis for 2 -- 800Delta
# PageTop[192.168.64.254_2]: <H1>Traffic Analysis for 2 -- 800Delta</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>800Delta in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>BRI0:1  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>AT&T DS0 Point (64 Kbps) (81)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>BR0:1</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>8000.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 3 >> Descr: 'BRI0:2' | Name: 'BR0:2' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.3)
###     SNMPv1_Session (remote host: "192.168.64.254" [192.168.64.254].161)
###                       community: "public"
###                      request ID: 1958187837
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
# 
# Target[192.168.64.254_3]: 3:public at 192.168.64.254
# SetEnv[192.168.64.254_3]: MRTG_INT_IP="" MRTG_INT_DESCR="BRI0:2"
# MaxBytes[192.168.64.254_3]: 8000
# Title[192.168.64.254_3]: Traffic Analysis for 3 -- 800Delta
# PageTop[192.168.64.254_3]: <H1>Traffic Analysis for 3 -- 800Delta</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>800Delta in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>BRI0:2  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>AT&T DS0 Point (64 Kbps) (81)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>BR0:2</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>8000.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 4 >> Descr: 'Ethernet0' | Name: 'Et0' | Ip: '212.19.57.49' |
Eth: '00-50-0f-02-3e-e0' ###

Target[192.168.64.254_4]: 4:public at 192.168.64.254
SetEnv[192.168.64.254_4]: MRTG_INT_IP="212.19.57.49"
MRTG_INT_DESCR="Ethernet0"
MaxBytes[192.168.64.254_4]: 1250000
Title[192.168.64.254_4]: Traffic Analysis for 4 -- 800Delta
PageTop[192.168.64.254_4]: <H1>Traffic Analysis for 4 -- 800Delta</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>800Delta in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Ethernet0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Et0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>212.19.57.49 ()</TD></TR>
 </TABLE>


### Interface 5 >> Descr: 'Null0' | Name: 'Nu0' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is a cisco Null0 interface
# 
# Target[192.168.64.254_5]: 5:public at 192.168.64.254
# SetEnv[192.168.64.254_5]: MRTG_INT_IP="" MRTG_INT_DESCR="Null0"
# MaxBytes[192.168.64.254_5]: 536870911
# Title[192.168.64.254_5]: Traffic Analysis for 5 -- 800Delta
# PageTop[192.168.64.254_5]: <H1>Traffic Analysis for 5 -- 800Delta</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>800Delta in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Null0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>Other (1)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Nu0</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>536.9 MBytes/s</TD></TR>
#  </TABLE>


___________________________________
Dr. Uwe Hemling
Delta Access Consulting GmbH
Eschborner Landstr. 42-50
Gebäude C
Tel. +49-69-947403-16
Fax +49-69-947403-77
email: u.hemling at dxsconsult.com
web: www.dxsconsult.com


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list