[mrtg] Re: Help With cammer.

[HASSARAJANI, Chetan]

----------------------------------------------------------------------------
------------------------
Hi,

		Thanks for your replies.
However I have more problems. I found out the sysObjectID for my switch. i.e
1.3.6.1.4.1.45.3.30.1

Now I have to make changes in the script to accommodate my Baystack Switch.
Well I am not a programmer so the script file was confusing. Basically the
script file had the following entries which has OID's type Entries. they
are:-

 snmpmapOID('vlanIndex' =>             '1.3.6.1.4.1.9.5.1.9.2.1.1',
            'vmVlan' =>                '1.3.6.1.4.1.9.9.68.1.2.2.1.2',
            'dot1dTpFdbPort' =>        '1.3.6.1.2.1.17.4.3.1.2',
            'dot1dBasePortIfIndex' =>  '1.3.6.1.2.1.17.1.4.1.2',
            'sysObjectID' =>           '1.3.6.1.2.1.1.2.0',
            'CiscolocIfDescr' =>       '1.3.6.1.4.1.9.2.2.1.1.28',
            'ifAlias' =>               '1.3.6.1.2.1.31.1.1.1.18');


My Router is CISCO 2500 series so I guess I don't have to make any changes
for the CISCO router OID's but only for the switch. So I replaced the OID on
the fifth line i.e
            'sysObjectID' =>           '1.3.6.1.2.1.1.2.0',
	with 

	       'sysObjectID' =>           '1.3.6.1.4.1.45.3.30.1'

but still the cfg file created was empty. Can anyone please guide me on the
right changes to be made to the script file.


Thanks,
Chetan
----------------------------------------------------------------------------
------------------------

I believe that OIDs that cammer polls will only work with Cisco Catalyst 
switches.

You will have to find the corresponding OIDs for the Baystack(Nortel) Switch

and hack appropriately.

I've run cammer many times and it saves our workstation support guys much 
time in determining what port into which a workstation is plugged. I've 
given them the cammer files for each switch and a DOS grep program. They 
like it. Thanks, Tobi!

Patrick
---
Patrick Bartkus, CCNP Certified	Sr. Network Support Analyst
Fleet Mortgage Group		    Columbia, SC
If truth was not absolute, how could there be justice?


----------------------------------------------------------------------------
------------------------
>From: "HASSARAJANI, Chetan" <chetan.hassarajani at bently.com>
>Date: Wed, 10 Jan 2001 01:42:47 -0800
>
>	Now let me explain my real problem again.
>
>	I have a CISCO router and a Baystack(Nortel) Switch.
>

----------------------------------------------------------------------------
------------------------

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi