[mrtg] Re: ANNOUNCE: mrtg-ping-probe Release_2_0_0

[Nasreddine Tabet-Aoul]

Dave have sent the config below sometimes ago, Which is very useful.
However, I have a question or rather clarification,

The 2 variables for the 'Maximal 5 Minutes  ...' for legend3 and 4 describes
which stats.

I can understand that the first twogive the maximum and the minimum for each
ping, that by default we are generating every 5 minutes but I am not so sure
what the 'Maximal 5 minute minimum... ' means.

Many thanks

Nas

-----Original Message-----
From: Dave Jones [mailto:DJones at TheFund.com]
Sent: 09 January 2001 20:29
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: ANNOUNCE: mrtg-ping-probe Release_2_0_0



I've downloaded this latest software and so far have not had any luck.  I'm
sure it's something stupid that I'm missing but I've tried all kinds of
different variables with no success. 

I'm running MRTG 2.9.4, on NT 4.0 SP4.  Running perl 5.2.2......  Here is my
config:

WorkDir: c:\www\mrtg\updown
#ThreshDir: c:\mrtg\thresholds
IconDir: c:\mrtg\images
######################################################################

Title[BrowardHiper1_ping]: Round Trip Time Analysis for BrowardHiper #1
PageTop[BrowardHiper1_ping]: <H1>Round Trip Time Analysis for BrowardHiper
#1</H1>
MaxBytes[BrowardHiper1_ping]: 180
AbsMax[BrowardHiper1_ping]: 10000
Options[BrowardHiper1_ping]: gauge, growright
Target[BrowardHiper1_ping]: c:/mrtg/bin/mrtg-ping-probe 172.16.150.18
YLegend[BrowardHiper1_ping]: round trip time 
ShortLegend[BrowardHiper1_ping]: ms
Legend1[BrowardHiper1_ping]: Maximum Round Trip Time in ms
Legend2[BrowardHiper1_ping]: Minimum Round Trip Time in ms
Legend3[BrowardHiper1_ping]: Maximal 5 Minute Maximum Round Trip Time in ms
Legend4[BrowardHiper1_ping]: Maximal 5 Minute Minimum Round Trip Time in ms
LegendI[BrowardHiper1_ping]: &nbsp;Max:
LegendO[BrowardHiper1_ping]: &nbsp;Min:
WithPeak[BrowardHiper1_ping]: ymwd

Here are the results:

Bareword found where operator expected at (eval 6) line 1, near "/mrtg/bin"
        (Missing operator before bin?)
Number found where operator expected at (eval 6) line 1, near "probe 172.16"
        (Do you need to predeclare probe?)
ERROR: Target[browardhiper1_ping] eval warning: syntax error at (eval 6)
line 1,
 near "/mrtg/bin"

Any clues?

David Jones


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi