[mrtg] Re: mrtg performance (again)..

[David Sawyer]

I did have a P133 running NTv4 with only 48mb of ram.

I was able to poll 140 devices in just over 2 mins.

Then I upgraded to a Dell Optiplex GX110, now polling almost 200 devices in
well under 30 seconds.

I am also running RRDTool on the same box polling the same targets, this
only takes 12 seconds.

> -----Original Message-----
> a) windows 2000 terminal server (233mhz, 128ram)
> b) stored to network drive (the webserver)
> c) see a) ... running w2k
> d) check
> e) tried this, but it's (almost) hopeless since I don't run mrtg and the
> webserver on the same machine.
> 
> -----Original Message-----
> 
> a) make sure you are using unix
> b) make sure mrtg logs to a local harddrive
> c) use the forks option (try forks: 5)
> d) use the runasdaemon option
> e) switch to rrdtool for logging
> 
> 
> 
----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi