[mrtg] Cisco Catalyst 2900 Walk

[GP2Site]

Hi,

when using cfgmaker to make the config file for my Catalog 2900XL Switch, it
hangs while doing a SNMP walk. It hangs on the following OID:

"--base Walking ifAlias"

cfgmaker doesn't do anything when coming to this point. Has someone seen
this before?

Rolph

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Roth, Gabrielle
Sent: Sunday, June 03, 2001 7:05
To: 'Daniel Curry'; Mrtg mailing list (E-mail) (E-mail)
Subject: [mrtg] Re: Cisco OIDS needed for 2948G-L3



Go to http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
Select "Catalyst 2948" under catalyst switches.  This will take you to a
page titled "Catalyst 4000 MIB Support List" but if you read the fine print,
it also covers the C2948.

For CPU: Try the CISCO-PROCESS-MIB.
For Memory:  Try the CISCO-MEMORY-POOL MIB.

I don't have any 2948s up right now that I can test this on, but these OIDs
work on all my other 2900 series switches.

HTH
-gabrielle

> -----Original Message-----
> From: Daniel Curry [mailto:dcurry at cgtime.com]
> Sent: Friday, June 01, 2001 7:35 PM
> To: Mrtg mailing list (E-mail) (E-mail)
> Subject: [mrtg] Cisco OIDS needed for 2948G-L3
>
> I am needing the OIDs fro Memory and CPU on a Cisco 2948G-L3
> switch.  I have looked at the available mibs on Cisco's ftp site, but am
> unable to identify anything related to this switch.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi