[mrtg] Re: 'DOS' based SNMPSET util for NT?

[David Sawyer]

You could use a program call MHAT, it will run the same command(s) on a list
of devices.
Good if you just want to change the password.

I don't know where you can download it from, maybe somebody on the list
does.

HTH
Dave

> -----Original Message-----
> From:	Steve Godfrey [SMTP:britsg at bristol-city.gov.uk]
> Sent:	Tuesday, June 05, 2001 8:15 AM
> To:	david.sawyer at uk.mckhboc.com
> Subject:	RE: [mrtg] 'DOS' based SNMPSET util for NT?
> 
> I'm trying to reset a cisco vty password remotely but I'm not having much
> luck with GetIf.  Here's the command I need to use
> 
> snmpset -t 10 -r 5 -c communityname hostname
> .1.3.6.1.4.1.9.2.1.53.150.150.150.150 \octetstring configfile.txt
> 
> Thanks anyway.
> 
> Steve
> 
> >>> David Sawyer <david.sawyer at uk.mckhboc.com> 06/04/01 05:08pm >>>
> GetIf has a 'Set' button, but I have never used it
> 
> If your after resetting the ifInErrors OID you may find that is read-only,
> therefore I doubt you can do a SNMP-SET.
> 
> Use GetIf to check what type of access you have to the OID you want
> resetting.
> 
> 
----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi