[mrtg] Re: How to set the maxbytes for gigabyte connection ?

[Matt Walkowiak]

Someone has written and posted a good explanation to this a couple-a times,
so you'll have to look thru the archives for a better explanation that the
one I am about to give.
Basically, MRTG has trouble with numbers over 32 bit blah blah blah has
trouble graphing more than 114 Mbs er something like that.

ya, I know, I was a whole heap of help... :)

Matt

-----Original Message-----
From: Ivan Doebeli [mailto:ivan.doebeli at unit.net]
Sent: Monday, June 11, 2001 9:45 AM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: How to set the maxbytes for gigabyte connection ?



hi,

I have the same problem when I watch 2 100Mb/s Links on 2 switch (3Com
SuperStack) in the same graph,
whith this cfg below ... I was trying to set the maxbytes to an IC3 as I
found in
the list (http://www.ee.ethz.ch/~slist/mrtg/msg02775.html) but it doesnt
works..
see http://mrtg2.unit.net/unbn-day.png :-(

----------------------------------------------------------------------------
--------------
Target[unbn]: 101:REALM at IPSWITCH1 + 101:REALM at IPSWITCH2
MaxBytes[unbn]: 19375000
Directory[unbn]: unbn
Options[unbn]: bits, growright
Title[unbn]: UNBN Uplink Summary 
PageTop[unbn]: <H1>Traffic Analysis for UNBN Uplink Summary 
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>UNBN Uplink Summary in Thurgauerstr. 74</TD></TR>
   <TR><TD>Maintainer:</TD><TD>Dave Oswald Unit.Net AG</TD></TR>
   <TR><TD>Port:</TD><TD>1</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>200 MBit/s</TD></TR>
  </TABLE>
----------------------------------------------------------------------------
--------------

Thanks in advance for your help

CU
Ivan

-----Original Message-----
From: Wu, Xiaohong [mailto:Xiaohong.Wu at tdsb.on.ca]
Sent: Montag, 11. Juni 2001 16:13
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] How to set the maxbytes for gigabyte connection ?



Hi,
I want to monitor my giga port using mrtg. But somehow when the traffic goes
above 100Mbps the graph just truncated.  I changed the maxbyte setting to
125,000,000  but still didn't work. Any clue to this ?

Thanks
Xiaohong

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi