[mrtg] no response from pix

Mario Passaggio mario.passaggio at etra.it
Thu Jun 28 10:18:40 MEST 2001


hi everybody
I'm new to mrtg and I'm trying to configure it
mrtg in my intention has got to run on RH 7.1 so I tried to conf
mrtg.cfg as follows

cfgmaker --global "WorkDir: /PATH" \
                   --global "Options[_]: growright,bits" \
                   --output /path/to/mrtg.cfg \
                   --ifref=ip \
                   public at x.y.z.t

the machine to monitor is a pix firewall with two interfaces one public
and one private (IP: x.y.z.t)
On the pix there are the following string

no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps

here is the non-response:

--base: Get Device Info on public at 10.33.210.253:
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.33.210.253" [10.33.210.253].161)
                  community: "public"
                 request ID: 1031749208
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 450
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID
on public at 10.33.210.253:
 at /usr/bin/cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because public at 10.33.210.253: does not
seem to support it
--snpo: Skipping ifDescr scanning because public at 10.33.210.253: does not
seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because public at 10.33.210.253:
does not seem to support it
--snpo: Skipping ifType scanning because public at 10.33.210.253: does not
seem to support it
--snpo: Skipping ifPhysAddress scanning because public at 10.33.210.253:
does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.33.210.253" [10.33.210.253].161)
                  community: "public"
                 request ID: 1031749214
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on public at 10.33.210.253:
 at /usr/bin/cfgmaker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.33.210.253" [10.33.210.253].161)
                  community: "public"
                 request ID: 1031749215
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on public at 10.33.210.253:
 at /usr/bin/cfgmaker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.33.210.253" [10.33.210.253].161)
                  community: "public"
                 request ID: 1031749216
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on public at 10.33.210.253:
 at /usr/bin/cfgmaker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.33.210.253" [10.33.210.253].161)
                  community: "public"
                 request ID: 1031749217
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on public at 10.33.210.253:
 at /usr/bin/cfgmaker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.33.210.253" [10.33.210.253].161)
                  community: "public"
                 request ID: 1031749218
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on public at 10.33.210.253:
 at /usr/bin/cfgmaker line 107

and the mrtg.cfg remain almost empty.
Now I'm wondering
is there something wrong in the syntax i used to launch cfgmaker or the
problem(s) resides on the pix (the snmp server)?
The interface to monitor is my default gw directly connected.
Any help will be appriciated
thanks in advance








--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list