[mrtg] can someone explain this to me

MegaNet DomainReg domainreg at meganet.net
Wed Nov 7 19:31:48 MET 2001

 ok here is the setup

border router <---------> fast0/28 (catalyst) and monitoring fast0/8 on same
cisco catalyst

Im sending a high traffic (10 megs) load to a machine inside a Vlan
(fast0/8), this Vlan interface is brustable to 1500.0 kb only, however I see
the the current in/out just leveling off at around 158k. The fast0/28 which
is a 100 mb interface connected to my core router sees the right amount of
traffic going trough it. My question is why isn't the Vlan stats for fast0/8
maxing out instead of just being leveled at 158k.

### Interface 9 >> Descr: 'FastEthernet0/8' | Name: 'Fa0/8' | Ip: '' | Eth:
'00-b0-64-b5-3d-88' ###

Target[x_00-b0-64-b5-3d-88]: !00-b0-64-b5-3d-88:xxx at xxx:
SetEnv[x_00-b0-64-b5-3d-88]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet0/8"
MaxBytes[x_00-b0-64-b5-3d-88]: 187500
Title[x_00-b0-64-b5-3d-88]: Traffic Analysis for 00-b0-64-b5-3d-88 --
PageTop[x_00-b0-64-b5-3d-88]: <H1>Traffic Analysis for 00-b0-64-b5-3d-88 --
   <TR><TD>System:</TD>     <TD>dot1q-02.xx.xx in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/8 To Blabbernet Communications
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/8</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1500.0 kbits/s</TD></TR>

Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list