[mrtg] Re: Mrtg Bay(welfleet) Fecns and becns

[Greg DeRenne]

When in doubt, start at the foundational "stuff".  Do you have access to
snmpget, snmpgetnext, snmpwalk?  If so, issue straight snmpget's on the
particular MIB values you are after.  Then build on that (by putting them
into your "target" in the .cfg file. )

Here is a cut paste on some MIB values I just ran using (you'd replace it w/
your OID's)...

% snmpget <host_name> public .1.3.6.1.4.1.1900.5.5.5.3.1.5.0

(I did this with SNMP extensions from UCDavis on a *nix box, but I think the
syntax works beyond this environment...  Note I had to append a ".0" for the
instance after my s/w component's OID.))

Hope that helps...
Greg DeRenne
----- Original Message -----
From: <Robert_Mersberger at BeverlyCorp.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Thursday, November 08, 2001 7:52 AM
Subject: [mrtg] Mrtg Bay(welfleet) Fecns and becns


>
> I have been ask go graph the Fecns and becns on on our frame-relay network
> routers. Has any one done this and could I get some suggestions.
> I am trying to get the information from mib .1.3.6.1.4.1.18.3.5.9.9.2.1.8
> and .1.3.6.1.4.1.18.3.5.9.9.2.1.9   I have no knowledge of perl scipting
and
> at present have not gone beyond the basic cfgmaker file generation.
>
> Please Help.
>
> Robert (Bob) Mersberger
> LAN Consultant
> Beverly Enterprises, Inc.
> 1000 Beverly Way
> Fort Smith, AR 72919
> Ph. 501-201-3442
> Fax: 501-478-3837
> Email Robert_Mersberger at Beverlycorp.com
>
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi