[mrtg] Re: 3Com Switch SNMP

[Rafael Gomez]

I have a superstack II 1100 and always the answer when I´m trying to build
the file with cfgmaker is "SNMP Error: no response from the device"

Any help?

-----Mensaje original-----
De: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]En
nombre de Frank Carreiro
Enviado el: Wednesday 7 de November de 2001 6:03 PM
Para: Rafael Gomez
CC: mrtg at list.ee.ethz.ch
Asunto: [mrtg] Re: 3Com Switch SNMP



Actually I'm monitoring several.  We're primarily a Cisco shop however
the 3Com Switches seem to be working fine.

We have a few 3300's around.  If I recall we had to set a trap
destination before the 3Com allowed MRTG to poll any snmp data.

Might want to check that first.   Usually if you can't perform an
snmpwalk it's been a problem on the managed device (in my experience at
least).

Regards

Frank Carreiro


Rafael Gomez wrote:

>I´ve been trying to monitor a 3Com switch with MRTG and has been
impossible.
>Have any of you experienced the same?
>
>Rafael Gómez
>rgomez at c-com.net.ve
>Cel: 58 414 337.11.22
>Charter Communications International Venezuela
>
>Tel: 58-212-576.60.80
>Fax: 58-212-572.43.43
>
>
>--
>Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
>Archive     http://www.ee.ethz.ch/~slist/mrtg
>FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
>WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi