[mrtg] Re: Plotting graph in mrtg using snmpcollect data
shiva yadav
shiva_yadav at hotmail.com
Fri Nov 16 03:06:39 MET 2001
If u see at the fist mail i had attatched the config file.
anyway :-
cpu.cfg:- config file
WorkDir: /home/nankahatela/.nanka/mrtg
IconDir: ../
# Cpu Utilization
Target[ntiis_cpu]:
.1.3.6.1.4.1.232.11.2.3.1.1.2.0&.1.3.6.1.4.1.232.11.2.3.1.1.2.0:Salwit at 10.0.
200.182
Title[ntiis_cpu]: Cyquator Shared "NTIIS" Cpu utilization
MaxBytes[ntiis_cpu]:100
PageTop[ntiis_cpu]: <H1> Cyquator Shared "NTIIS" Cpu utilization %</H1>
Unscaled[ntiis_cpu]: ymwd
ShortLegend[ntiis_cpu]: %
XSize[ntiis_cpu]: 380
YSize[ntiis_cpu]: 100
YLegend[ntiis_cpu]: CPU Usage
Legend1[ntiis_cpu]: CPU Utilization in %
#Legend2[ntiis_cpu]:
#Legend3[ntiis_cpu]:
#Legend4[ntiis_cpu]:
LegendI[ntiis_cpu]: usage
LegendO[ntiis_cpu]:
Options[ntiis_cpu]: gauge, growright
Regards
Shiva.
***********
----- Original Message -----
From: "Paul C. Williamson" <pwilliamson at mandtbank.com>
To: <shiva_yadav at hotmail.com>; <mrtg at list.ee.ethz.ch>
Sent: Thursday, November 15, 2001 09:52
Subject: Re: [mrtg] Re: Plotting graph in mrtg using snmpcollect data
WHAT DOES THE TARGET LINE LOOK LIKE IN THE CONFIG FILE?
Sorry for the shouting, but you need to post this
before anyone can help you.
Paul
>>> "shiva yadav" <shiva_yadav at hotmail.com> 11/15/01 08:22PM >>>
Hi,
Mrtg plot the graph using snmpcollect data which nnm collect in snmpcollect
directory.
So mrtg is pointing to snmpcollect data & getting the value. Insteady of
polling indugually.
NNM is polling, collecting the data in snmpcollect director & mrtg is
pointing to snmpcollect.
Regards
Shiva.
*********
----- Original Message -----
From: "Paul C. Williamson" <pwilliamson at mandtbank.com>
To: <shiva_yadav at hotmail.com>; <mrtg at list.ee.ethz.ch>
Sent: Thursday, November 15, 2001 08:57
Subject: [mrtg] Re: Plotting graph in mrtg using snmpcollect data
>
> So, as I asked before...HOW does mrtg plot the data?
>
> How is mrtg getting the data in the .log file? What is it polling
> on the OV side to get the data? From the looks of it, MRTG
> is trying to collect the data as normal. What is the target
> line of the existing cfg that works correctly?
>
> Paul
>
> >>> "shiva yadav" <shiva_yadav at hotmail.com> 11/15/01 07:23PM >>>
> Hi ,
>
> I did not received your previous mail.
>
> anyway :-
>
> We have integrated NNM with mrtg so mrtg does not induvidually polls the
> target system. NNM polls the system & collect the data & then mtrg plots
it.
>
> We have sucessfully able to plot the graph for cisco interface, but we
are
> not able to plot for system cpu.
>
> Following are the errors :-
>
> Error: - root at bbycyqsip:perl mrtg cpu.cfg
> Can't locate object method "new" via package "IO::Socket::INET" at
> /usr/local/mr
> tg-2/lib/mrtg2/SNMP_Session.pm line 523.
> root at bbycyqsip
>
> If u can help me to solve the problem.
>
> Your any more details pls let us know.
>
> Regards
> Shiva.
> ***********
>
>
> ----- Original Message -----
> From: "Paul C. Williamson" <pwilliamson at mandtbank.com>
> To: <shiva_yadav at hotmail.com>; <mrtg at list.ee.ethz.ch>
> Sent: Thursday, November 15, 2001 07:19
> Subject: [mrtg] Re: Plotting graph in mrtg using snmpcollect data
>
>
> >
> > Please stop posting the same question over and over again. If you don't
> get an answer, it means nobody knows or hasn't had the time to answer.
> >
> > What is ovmrtg? I asked that before, and didn't get an answer. I'm
> guessing you are using OpenView, and somehow mrtg is tied into OpenView.
Is
> this correct?
> > Otherwise, I have no idea what ovmrtg is. Last I checked, OpenView and
> MRTG don't have any hooks to each other.
> >
> > How does the data get from NNM from MRTG? Did you write a custom
script?
> I suspect that mrtg is collecting the data separately from NNM. Where is
> the error popping up? What happens when you run mrtg from the command
line
> like:
> >
> > perl mrtg cpu.cfg
> >
> > It should run ok with no errors. Start with that and come back with the
> results.
> >
> > Paul
> > >>> "shiva yadav" <shiva_yadav at hotmail.com> 11/15/01 04:45 AM >>>
> > Hi,
> >
> > We are facing problem in plotting the graph in ovmrtg.
> >
> > We have integrated Network Node Mamagement (NNM ) with mrtg for
plotting
> the graph.
> >
> > So nnm snmpcollect collects the data & mrtg plots it.
> >
> > Note that we are able to plot the graph in mrtg using snmpcollect data
> for switchs & routers interface, but now we want to even plot the mrtg
graph
> for system cpu, swap & memory.
> >
> > Problem :- snmpcollect is collecting the data for system cpu, swap,
> memory using Compaq Inside manager MIBS, but we are not able to plot it in
> MRTG
> >
> > O/S :- Solaris 2.6
> >
> > cpu.cfg:- config file
> >
> > WorkDir: /home/nankahatela/.nanka/mrtg
> > IconDir: ../
> >
> > # Cpu Utilization
> >
> > Target[ntiis_cpu]:
>
.1.3.6.1.4.1.232.11.2.3.1.1.2.0&.1.3.6.1.4.1.232.11.2.3.1.1.2.0:Salwit at 10.0.
> 200.182
> > Title[ntiis_cpu]: Cyquator Shared "NTIIS" Cpu utilization
> > MaxBytes[ntiis_cpu]:100
> > PageTop[ntiis_cpu]: <H1> Cyquator Shared "NTIIS" Cpu utilization
%</H1>
> > Unscaled[ntiis_cpu]: ymwd
> > ShortLegend[ntiis_cpu]: %
> > XSize[ntiis_cpu]: 380
> > YSize[ntiis_cpu]: 100
> > YLegend[ntiis_cpu]: CPU Usage
> > Legend1[ntiis_cpu]: CPU Utilization in %
> > #Legend2[ntiis_cpu]:
> > #Legend3[ntiis_cpu]:
> > #Legend4[ntiis_cpu]:
> > LegendI[ntiis_cpu]: usage
> > LegendO[ntiis_cpu]:
> > Options[ntiis_cpu]: gauge, growright
> >
> > Error: - root at bbycyqsip:perl mrtg cpu.cfg
> > Can't locate object method "new" via package "IO::Socket::INET" at
> /usr/local/mr
> > tg-2/lib/mrtg2/SNMP_Session.pm line 523.
> > root at bbycyqsip:
> >
> >
> > Can someone help us on this problem.
> >
> > Regards
> > Shiva.
> > *********
> >
> >
> > --
> > Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe > >
Archive http://www.ee.ethz.ch/~slist/mrtg
> > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
> > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
> >
> >
> >
> > --
> > Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe > >
Archive http://www.ee.ethz.ch/~slist/mrtg
> > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
> > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
> >
> >
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive http://www.ee.ethz.ch/~slist/mrtg
> FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
> WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list