[mrtg] Re: target with multiplete values on same host

[bear]

Hi
Target[rx19]: .1.3.6.1.4.1.800.2.2.15.1.1.12.4.4.19:public at xxxxxx +
1.3.6.1.4.1.800.2.2.15.1.1.12.5.5.19:public at xxxxxx + etc etc
looks good but you still need two(2) oids per ..
ie
Target[rx19]:
.1.3.6.1.4.1.800.2.2.15.1.1.12.4.4.19&.1.3.6.a.zero.returning.iod:public at xxx
xxx +
.1.3.6.1.4.1.800.2.2.15.1.1.12.5.5.19&.1.3.6.a.zero.returning.iod:public at xxx
xxx + etc etc ...

it do work really
Bear


> Hello,
> I have been using mrtg for quite a while now and i have been trying to
> monitor the traffic on a vlan on one of our router. The problem is that
> the vlan is affected to 4 different ports, so i need to monitor the sum
> of those values:
>
> (result of a snmpwalk)
> .1.3.6.1.4.1.800.2.2.15.1.1.12.4.4.19 = Counter32: 2288847
> .1.3.6.1.4.1.800.2.2.15.1.1.12.4.5.19 = Counter32: 3094514477
> .1.3.6.1.4.1.800.2.2.15.1.1.12.5.5.19 = Counter32: 0
> .1.3.6.1.4.1.800.2.2.15.1.1.12.6.20.19 = Counter32: 77520793
>
> my target line in my vlans.cfg file:
>
> Target[rx19]: .1.3.6.1.4.1.800.2.2.15.1.1.12.4.4.19:public at xxxxxx +
> .1.3.6.1.4.1.800.2.2.15.1.1.12.5.5.19:public at xxxxxx +
> .1.3.6.1.4.1.800.2.2.15.1.1.12.4.5.19:public at xxxxxx +
> .1.3.6.1.4.1.800.2.2.15.1.1.12.6.20.19:public at xxxxxx
>
> but the graph stays empty... in rx19.log the values are all zeros... any
> idea what i did wrong?



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi