[mrtg] Re: Mesuring latency with MRTG (fwd)

[Steven Williams]

HI Simon,

Here is a version ported to use SNMP_Session and BER and works great under
W2K.

If anyone needs a hand, give me a yell.

Steve

-----Original Message-----
From: Simon Watts [mailto:swatts at connect.com.au]
Sent: Monday, October 15, 2001 9:39 AM
To: Steven Williams
Subject: RE: [mrtg] Re: Mesuring latency with MRTG (fwd)



Sorry, I have never used SNMP on Win2K, and have also not compiled Perl
modules on that platform.

Regards,

Simon


On Mon, 15 Oct 2001, Steven Williams wrote:

> I have downloaded the NET-SNMP package and SNMP.PM module, but I have
found
> its instructions for installation on a Windows server very vague,
especially
> on what the directory structure should be and compiling.
> 
> Could anyone give me a quick idiots guide to doing this on W2K server?
> 
> Thanks
> 
> Steve
> 
> -----Original Message-----
> From: Simon Watts [mailto:swatts at connect.com.au]
> Sent: Friday, October 12, 2001 3:38 PM
> To: Steven Williams (AUSTRALIA)
> Subject: RE: [mrtg] Re: Mesuring latency with MRTG (fwd)
> 
> 
> 
> You will probably have to install the SNMP module under activeperl.  I
> believe that this is different to SNMP_session
> 
> 
> Simon
> 
> On Fri, 12 Oct 2001, Steven Williams (AUSTRALIA) wrote:
> 
> > HI Guys,
> > 
> > Is this on Windows or linux?
> > 
> > I am trying it on W2K, and keep on getting errors such as cant locate
> > SNMP.pm, which I dont have in the Active Perl 5 libraries.
> > 
> > Isnt SNMP.PM more for linux and requires other modules where
> SNMP_session.pm
> > is the same thing that can run under windows except it can only use
oids?
> > 
> > Any ideas?
> > 
> > Thanks
> > 
> > Steve
> > 
> > 
> > 
> > -----Original Message-----
> > From: Simon Watts [mailto:swatts at connect.com.au]
> > Sent: Friday, October 12, 2001 9:17 AM
> > To: Patrick Bartkus
> > Cc: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] Re: Mesuring latency with MRTG (fwd)
> > 
> > 
> > 
> > 
> > Thanks Patrick, 
> > 
> > Compliments appreciated - this has been my first ever contribution to
the
> > open source community.
> > 
> > Regards,
> > 
> > Simon
> > 
> > On Thu, 11 Oct 2001, Patrick Bartkus wrote:
> > 
> > > Simon,
> > > 
> > > What a great script!
> > > 
> > > I have been a member of this wonderful community for a year and a few 
> > > months. Someone asks at least every three or four months about how to
do
> 
> > > this.
> > > 
> > > And you have done it!
> > > 
> > > I vote that it be included in the "contrib" directory.
> > > 
> > > Good job, Simon!
> > > Patrick
> > > ---
> > 
> > 
> > --
> > Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> > Archive     http://www.ee.ethz.ch/~slist/mrtg
> > FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> > WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> > 
> > 
> > ---
> > This email and any files transmitted with it are solely intended for the
> use of the
> > addressee(s) and may contain information that is confidential and
> privileged.  If you
> > receive this email in error, please advise us by return email
immediately.
> Please also
> > disregard the contents of the email, delete it and destroy any copies
> immediately.
> > Computershare Limited and its subsidiaries do not accept liability for
the
> views
> > expressed in the email or for the consequences of any computer viruses
> that may be
> > transmitted with this email
> > 
> > This email is also subject to copyright.  No part of it should be
> reproduced, adapted or 
> > transmitted without the written consent of the copyright owner.
> > 
> 
> 
> ----------------------------------------------------------------
> Simon Watts            Assoc. Network Architect  9/114 Albert Rd
> swatts at connect.com.au  Ph  +61 3 9674 3890       South Melbourne
> Connect.com.au P/L     Fax +61 3 9251 3666       Vic, Aust, 3205 
> ----------------------------------------------------------------
> 
> 
> 
> ---
> This email and any files transmitted with it are solely intended for the
use of the
> addressee(s) and may contain information that is confidential and
privileged.  If you
> receive this email in error, please advise us by return email immediately.
Please also
> disregard the contents of the email, delete it and destroy any copies
immediately.
> Computershare Limited and its subsidiaries do not accept liability for the
views
> expressed in the email or for the consequences of any computer viruses
that may be
> transmitted with this email
> 
> This email is also subject to copyright.  No part of it should be
reproduced, adapted or 
> transmitted without the written consent of the copyright owner.
> 


----------------------------------------------------------------
Simon Watts            Assoc. Network Architect  9/114 Albert Rd
swatts at connect.com.au  Ph  +61 3 9674 3890       South Melbourne
Connect.com.au P/L     Fax +61 3 9251 3666       Vic, Aust, 3205 
----------------------------------------------------------------




---
This email and any files transmitted with it are solely intended for the use of the
addressee(s) and may contain information that is confidential and privileged.  If you
receive this email in error, please advise us by return email immediately.  Please also
disregard the contents of the email, delete it and destroy any copies immediately.
Computershare Limited and its subsidiaries do not accept liability for the views
expressed in the email or for the consequences of any computer viruses that may be
transmitted with this email

This email is also subject to copyright.  No part of it should be reproduced, adapted or 
transmitted without the written consent of the copyright owner.


-- Attached file removed by Listar and put at URL below --
-- Type: application/octet-stream
-- Size: 9k (10214 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/pingNodeNT.pl


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi