[mrtg] Re: Help with Cisco Switches

[Chirhart, Brian]

That does change everything - 6509's use the CAT os not IOS - Here is a
script to run instead of CFGMaker -



-----Original Message-----
From: Randall.Coffelt at tellabs.com [mailto:Randall.Coffelt at tellabs.com]
Sent: Thursday, September 27, 2001 14:18 PM
To: Chirhart, Brian
Cc: mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Re: Help with Cisco Switches


Thanks!

Let me just see if i have this correct.

I have a 6509 that has approx 15 gig interfaces that are up and active 
(with traffic).  All I get is Sc0, SL0, and one Gig interface.  So you 
believe if i set the bandwidth statements, that I should get all of the 
interfaces??

Thanks Guys!!

-----Original Message-----
From: bchirhart at fnni.com [mailto:bchirhart at fnni.com]
Sent: Thursday, September 27, 2001 2:05 PM
To: Coffelt, Randall
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Help with Cisco Switches



To get ports that are down, or do not show any traffic I had to add a
Bandwidth statement to the switches on every interface.  
Bandwidth=100000000
for 100 Mb and 1000000000 for Gig ports.  hope this helps.

-----Original Message-----
From: Randall.Coffelt at tellabs.com [mailto:Randall.Coffelt at tellabs.com]
Sent: Thursday, September 27, 2001 13:59 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Help with Cisco Switches



I have asked this before, but I would like to see if anyone has any new 
ideas.

I cannot seem to get ALL of the ports off of my cisco switches.  I can 
get sc0 and maybe one GIG port.  Can someone please help??



/mrtg/bin/cfgmaker --global "Options[_]: growright,bits" --global 
"WorkDir: /mrtg/data" \
--ifdesc=descr --ifref=descr  --descint --subdirs=bb6509aswitch 
--output=/mrtg/cfg/bb6509aswitch.cfg test at bb6509a
/mrtg/bin/indexmaker --title=BB6509aswitch --enumerate --sort=title  
--show=day  --section=descr \
/mrtg/cfg/bb6509aswitch.cfg > /mrtg/data/bb6509aswitch.html




Thanks,
**************************
Randall Coffelt


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi





-- Attached file removed by Listar and put at URL below --
-- Type: application/octet-stream
-- Size: 40k (41010 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/CATMaker


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi