[mrtg] Re: Problems installing MRTG w/ RRDtool

[Jarmoc, Jeff]

Thanks for your help.

The numbers match what's in the .log file.  I can run rrdtool.exe when I'm
in my c:\rrdtool\src\tool_release subdirectory.  I have a PathAdd:
c:\rrdtool\srv\tool_release line in my mrtg.cfg file, so MRTG should be able
to run it as well.  Prior to adding that PathAdd statement I received an
error that MRTG was unable to run RRDtool, so the absence of that error
leads me to think it's finding rrdtool.exe fine.

Any other ideas?

Jeff Jarmoc - CCSA, CCNA, MCSE
Network Analyst - Grubb & Ellis
847.753.7617
Jeff.Jarmoc at Grubb-Ellis.com


-----Original Message-----
From: Alex van den Bogaerdt [mailto:alex at slot.hollandcasino.nl]
Sent: Thursday, April 11, 2002 5:03 PM
To: Jeff.Jarmoc at Grubb-Ellis.com
Cc: mrtg at list.ee.ethz.ch
Subject: Re: [mrtg] Problems installing MRTG w/ RRDtool


Jarmoc, Jeff wrote:

> Use of uninitialized value in concatenation (.) or string at mrtg line
235.
> Use of uninitialized value in concatenation (.) or string at mrtg line
235.

These errors also exist on my linux installation.  They don't seem to be
related to your problem.

> '-' is not recognized as an internal or external command,
> operable program or batch file.

This one doesn't.  

> ERROR: Cannot update c:\inetpub\wwwroot\mrtg\192.168.1.2_1.rrd with
> '1018544857:
> 712052135:2168831461' opening 'c:\inetpub\wwwroot\mrtg\192.168.1.2_1.rrd':
> No su
> ch file or directory

The numbers seem to be fine albeit rather high.  If they are approximately
the same as the numbers in the first line of the 192.168.1.2_1.log file,
it probably hasn't to do with your problem either.

My guess is that rrdtool.exe cannot be found.  Can you run that command?
If so, can MRTG run the command (can it find it).

No solution but hopefully a step closer to one.

cheers,
-- 
   __________________________________________________________________
 / alex at slot.hollandcasino.nl                  alex at ergens.op.het.net \
| work                                                         private |
| My employer is capable of speaking therefore I speak only for myself |
+----------------------------------------------------------------------+
| Technical questions sent directly to me will be nuked. Use the list. | 
+----------------------------------------------------------------------+
| http://faq.mrtg.org/                                                 |
| http://rrdtool.eu.org  --> tutorial                                  |
+----------------------------------------------------------------------+

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi