[mrtg] Re: cisco ATM PVC in & out octets

[Greg.Volk at edwardjones.com]

> 
> Hi!
> 
> I'm trying to graph ATM PVC ifInOctets & ifOutOctes, but mrtg graphs
> ifOutOctets with a wrong value. I also tried to graph using CISCO-
> AAL5-MIB private mib (cAal5VccInOctets & cAal5VccOutOctets) and I get
> the same values as using mib-II.
> 
> What is the problem?
> 
> I'm using MRTG 2.9.18, Cisco 7507 and IOS: Version 12.0(14)S.
> 

What does your config look like? I'm graphing atm subints
from six cisco 7206 vxr's. I didn't do anything special, just used
cfgmaker --ifref=descr --ifdesc=descr comm at router. My interface 
configs look like:


Target[atm-router1a_ATM4_0.27-aal5_layer]: \ATM4/0.27-aal5\ layer:public at atm-router1a:
SetEnv[atm-router1a_ATM4_0.27-aal5_layer]: MRTG_INT_IP="10.27.127.13" MRTG_INT_DESCR="ATM4/0.27-aal5 layer"
Directory[atm-router1a_ATM4_0.27-aal5_layer]: atm-router1a
MaxBytes[atm-router1a_ATM4_0.27-aal5_layer]: 18720000
Title[atm-router1a_ATM4_0.27-aal5_layer]: ATM4/0.27-aal5 layer -- atm-router1a.
PageTop[atm-router1a_ATM4_0.27-aal5_layer]: <H1>ATM4/0.27-aal5 layer -- atm-router1a.</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>atm-router1a. in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD>NETWORK LAN-WAN </TD></TR>
   <TR><TD>Description:</TD><TD>ATM4/0.27-aal5 layer *** CONNECTION TO ca-nnnn *** </TD></TR>
   <TR><TD>ifType:</TD>     <TD>aal5 (49)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>149.8 Mbits/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.27.127.13 ()</TD></TR>
 </TABLE>

Target[atm-router1a_ATM4_0.31-aal5_layer]: \ATM4/0.31-aal5\ layer:public at atm-router1a:
SetEnv[atm-router1a_ATM4_0.31-aal5_layer]: MRTG_INT_IP="10.31.127.13" MRTG_INT_DESCR="ATM4/0.31-aal5 layer"
Directory[atm-router1a_ATM4_0.31-aal5_layer]: atm-router1a
MaxBytes[atm-router1a_ATM4_0.31-aal5_layer]: 18720000
Title[atm-router1a_ATM4_0.31-aal5_layer]: ATM4/0.31-aal5 layer -- atm-router1a.
PageTop[atm-router1a_ATM4_0.31-aal5_layer]: <H1>ATM4/0.31-aal5 layer -- atm-router1a.</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>atm-router1a. in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD>NETWORK LAN-WAN </TD></TR>
   <TR><TD>Description:</TD><TD>ATM4/0.31-aal5 layer *** CONNECTION TO uk-nnnn *** </TD></TR>
   <TR><TD>ifType:</TD>     <TD>aal5 (49)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>149.8 Mbits/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.31.127.13 ()</TD></TR>
 </TABLE>


Target[atm-router1a_ATM4_0.0-aal5_layer]: \ATM4/0.0-aal5\ layer:public at atm-router1a:
SetEnv[atm-router1a_ATM4_0.0-aal5_layer]: MRTG_INT_IP="" MRTG_INT_DESCR="ATM4/0.0-aal5 layer"
Directory[atm-router1a_ATM4_0.0-aal5_layer]: atm-router1a
MaxBytes[atm-router1a_ATM4_0.0-aal5_layer]: 18720000
Title[atm-router1a_ATM4_0.0-aal5_layer]: ATM4/0.0-aal5 layer -- atm-router1a.
PageTop[atm-router1a_ATM4_0.0-aal5_layer]: <H1>ATM4/0.0-aal5 layer -- atm-router1a.</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>atm-router1a. in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD>NETWORK LAN-WAN </TD></TR>
   <TR><TD>Description:</TD><TD>ATM4/0.0-aal5 layer *** CONNECTION TO carrier-nnnn *** </TD></TR>
   <TR><TD>ifType:</TD>     <TD>aal5 (49)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>149.8 Mbits/s</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi