[mrtg] Re: Help ! E1-2600
Materazzo, Martin (Nwk.Mngr/Comms.Cons)
Martin.Materazzo at hp.com
Wed Aug 7 01:28:39 MEST 2002
Bernardo
Here is my Router's 'show version':
router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(8)T4, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 04-May-02 03:19 by ccai
Image text-base: 0x80008074, data-base: 0x80A2A2B0
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
router uptime is 5 days, 22 hours, 55 minutes
System returned to ROM by reload
System image file is "flash:c2600-i-mz.122-8.T4.bin"
cisco 2651 (MPC860P) processor (revision 0x200) with 27648K/5120K bytes of memor
y.
Processor board ID JAB054606D1 (3300814858)
M860 processor: part number 5, mask 2
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 Channelized E1/PRI port(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Here is mrtg template for my Cisco 2651 with E1/PRI controller: it all works well!!!
### Interface 1 >> Descr: 'FastEthernet0/0' | Name: 'Fa0/0' | Ip: 'x.x.x.x' | Eth: '' ###
Options[x.x.x.x_1]: bits
Target[x.x.x.x_1]: 1:public at x.x.x.x:
SetEnv[x.x.x.x_1]: MRTG_INT_IP="x.x.x.x" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[x.x.x.x_1]: 12500000
Title[x.x.x.x_1]: Fast Ethernet Traffic Analysis -- router
PageTop[x.x.x.x_1]: <H1>Fast Ethernet Traffic Analysis -- router</H1>
<TABLE>
<TR><TD>System:</TD> <TD>router in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>FastEthernet0/0 </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD>Fa0/0</TD></TR>
<TR><TD>Max Speed:</TD> <TD>100 Mpbs Full Duplex</TD></TR>
<TR><TD>Ip:</TD> <TD>x.x.x.x ()</TD></TR>
</TABLE>
### Interface 5 >> Descr: 'Serial0/0:0' | Name: 'Se0/0:0' | Ip: 'y.y.y.y' | Eth: '' ###
Options[x.x.x.x_5]: bits
Target[x.x.x.x_5]: 5:public at x.x.x.x:
SetEnv[x.x.x.x_5]: MRTG_INT_IP="" MRTG_INT_DESCR="Serial0/0:0"
MaxBytes[x.x.x.x_5]: 256000
Title[x.x.x.x_5]: Telstra Internet Direct Traffic Analysis -- router
PageTop[x.x.x.x_5]: <H1>Telstra Internet Direct Traffic Analysis -- router</H1>
<TABLE>
<TR><TD>System:</TD> <TD>router in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>Serial0/0:0 Telstra Internet Direct FNN </TD></TR>
<TR><TD>ifType:</TD> <TD>propPointToPointSerial (22)</TD></TR>
<TR><TD>ifName:</TD> <TD>Se0/0:0</TD></TR>
<TR><TD>Max Speed:</TD> <TD>2048 Mbps</TD></TR>
<TR><TD>Ip:</TD> <TD> ()</TD></TR>
</TABLE>
###CPU Stats
Target[routercpu]: 1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:public at x.x.x.x
MaxBytes[routercpu]:100
Title[routercpu]: CPU Utilization
PageTop[routercpu]: <H1>CPU Utilization for "x.x.x.x Internet Router (Cisco 2651) @ Port Melbourne"</H1>
YLegend[routercpu]:CPU Utilization
ShortLegend[routercpu]: %
LegendI[routercpu]: 5 Min:
LegendO[routercpu]: 5 Min:
Legend1[routercpu]: AvgBusy 5 Min
Legend2[routercpu]: AvgBusy 5 Min
Legend3[routercpu]: MaxBusy 5 Min
Legend4[routercpu]: MaxBusy 5 Min
Options[routercpu]: gauge, nopercent
###Memory Stats
Target[routerfreemem]: 1.3.6.1.4.1.9.9.48.1.1.1.6.1&1.3.6.1.4.1.9.9.48.1.1.1.6.2:public at x.x.x.x
MaxBytes[routerfreemem]:14920792
Title[routerfreemem]: Free Memory - x.x.x.x
PageTop[routerfreemem]: <H1>Free Memory Analysis for "router Internet Router (Cisco 2651) @ Port Melbourne"</H1>
YLegend[routerfreemem]: FreeMem
ShortLegend[routerfreemem]: bytes
LegendI[routerfreemem]: Free Proc; 
LegendO[routerfreemem]: Free I/O; 
Options[routerfreemem]: gauge, absolute, integer, nopercent
#---------------------------------------------------------------
Regards
Martin Materazzo
Compaq, part of the new HP
Compaq Management Services
283 Normanby Rd Port Melbourne 3207
Phn:613 9203 8514 Fax:613 9203 8585
-----Original Message-----
From: Estagiario FIT-AAR 01 [mailto:estfit01 at ipiranga.com.br]
Sent: Wednesday, August 07, 2002 6:04 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Help ! E1-2600
Hi ,
I have a cisco/2600 with a E1/PRI controller, that is configured to
a unframed chanell of 2 M/sec. This create a Serial0/0:0 (mib ifindex = 4 ).
I am having problem to monitoring the traffic of this link.
This router have a fasteth that mrtg monitor without a problem.
Cfgmaker returns me this :
### Interface 3 >> Descr: 'E1 0/0' | Name: 'E1 0/0' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is a DS1 controllers
# # Target[xxxx]: 3:xxxxx at xxxxxxxx:
# SetEnv[xxxx]: MRTG_INT_IP="" MRTG_INT_DESCR="E1 0/0"
# MaxBytes[xxxx]: 256000
....
# <TR><TD>Description:</TD><TD>E1 0/0 </TD></TR>
# <TR><TD>ifType:</TD> <TD>ds1 (18)</TD></TR>
# <TR><TD>ifName:</TD> <TD>E1 0/0</TD></TR>
# <TR><TD>Max Speed:</TD> <TD>256.0 kBytes/s</TD></TR>
# </TABLE>
### Interface 4 >> Descr: '' | Name: '' | Ip: 'xxxxx ip of my link xxxx' | Eth:
'' ###
### The following interface is commented out because:
### * has a speed of which makes no sense
#
# Target[xxxxx]: 4:xxxxxx at xxxxxxxx:
# SetEnv[xxxx]: MRTG_INT_IP=" ip of my link " MRTG_INT_DESCR=""
# MaxBytes[xxxxx]: 0
...
# <TR><TD>Description:</TD><TD> </TD></TR>
# <TR><TD>ifType:</TD> <TD> ()</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# <TR><TD>Ip:</TD> <TD>200.255.61.146
(rtr-internet.ipiranga.com.br)</TD></TR>
# </TABLE>
I try diferents targets but doesn't work. When i force the interface 4,
mrtg returns:
2002-08-06 16:50:26 -- WARNING: Expected a number but got '#<unprintable BER
type 0x81>'
2002-08-06 16:50:26 -- WARNING: Expected a number but got '#<unprintable BER
type 0x81>'
Anyone could help me !!!!
Thanks,
Bernardo
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list