[mrtg] Re: Virtual Path monitoring on a Fore/Marconi ASX-4000 swi tch

[Grossman, Benjamin]

You can try:
(we are actually looking at VC's here so you may have to do additional
research to located VP OIDs)
NOTE: Marconi tends to change all the interface numbering when a new version
of the OS (ForeThought) is released. This reflects new hardware with greater
variety of possible interface configurations (density), and is as opposed to
Cisco, there renumbering seems to happen when hardware is inserted in the
device. And of course, an SVC/SVP will be subject to re-routing and may get
extensively renumbered. So if your counters go to zero, check to see if the
indexes changed..

#  This file will let MRTG collect CELL counts for specific PVC's on I-Net
switches.  
#		*53 is used to convert this to byte counts...bits option can
be added to this.
#
#	This monitors I-NET Backbone Bandwidth used for each virtual circuit
pair.
#
#
#	the general format for these calls is:
#			.1.3.6.1.4.1.326.2.2.2.1.4.1.1.8.port.path.circuit
#
#	Where port is as follows for the ASX4000 (These changed on after
upgrade to S_ForeThought_7.1.0 FCS-Patch (1.89492)
#		1c1  -> 512 (was 128 before)
#		1c2  -> 513
#		... 
#		1c6   ->517
#		... 
#		1c16 -> 142
#
#		1d1  -> 768  (was 192 before)
#		1d2  -> 769
#		1d3  -> 770
#   	      1d4  -> 771
#
#	at WESTIN after upgrade to S_ForeThought_7.1.0 FCS-Patch (1.89492)
#		2c1  -> 
#		2c2  -> 
#		... 
#		2c6   ->1780?
#		... 
#		2c16 -> 1751
#
#		2d1  -> 1792
#		2d2  -> 1793
#		2d3  -> 1794
#   	      2d4  -> 1795
#
...
#---------------------------------------------------------------------------
---------
#
###
### KSC-C1 
### 
Directory[KSC-C1]: KSC-C1
Target[KSC-C1]:
.1.3.6.1.4.1.326.2.2.2.1.4.1.1.8.517.0.121&.1.3.6.1.4.1.326.2.2.2.1.4.1.1.8.
768.0.280:public at KSC::::2*48
SetEnv[KSC-C1]: MRTG_INT_IP="" MRTG_INT_DESCR=""
MaxBytes[KSC-C1]: 2500000
Title[KSC-C1]:  KSC-C1 
PageTop[KSC-C1]: <H1> KSC-C1</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>icKingstreet</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>I-Net NOC</TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>TLS UBR PVC </TD></TR>
   <TR><TD>ifName:</TD>     <TD>C1 on KSC </TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>20M bits/s</TD></TR>
 </TABLE>

### 
### Kingstreet-to-Ryerson-KSC-C2
### 
Directory[KSC-C2]: KSC-C2
Target[KSC-C2]:
.1.3.6.1.4.1.326.2.2.2.1.4.1.1.8.517.0.129&.1.3.6.1.4.1.326.2.2.2.1.4.1.1.8.
516.0.129:public at KSC::::2*48
SetEnv[KSC-C2]: MRTG_INT_IP="" MRTG_INT_DESCR=""
MaxBytes[KSC-C2]: 2500000
Title[KSC-C2]:  KSC-C2 
PageTop[KSC-C2]: <H1> KSC-C2</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>icKingstreet</TD></TR>
   <TR><TD>Maintainer:</TD> <TD> I-Net NOC</TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>TLS UBR PVC </TD></TR>
   <TR><TD>ifName:</TD>     <TD>C2 on KSC </TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>20M bits/s</TD></TR>
 </TABLE>
...

Benjamin k Grossman
  benjamin.grossman at metrokc.gov
  NMS Engineer - 206/263-4543
  King County Institutional Network (I-NET)
  Seattle/Washington/USA



-----Original Message-----
From: Diana Eichert [mailto:deeiche at freeshell.org] 
Sent: Friday, August 09, 2002 10:57 AM
To: Mrtg
Subject: [mrtg] Virtual Path monitoring on a Fore/Marconi ASX-4000 switch



I'd like to monitor a terminated virtual path or VTP on a Fore ASX-4000.
Does 
anyone know what the Fore/Marconi SNMP variable and/or OID to get this
information.

thanks

diana eichert 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi