[mrtg] Re: server side gigabit LAN card

[김동균]

Thanks, amanda
Your OID is under SNMP v1.
In that case, if the network traffic goes over 100Mbps,
MRTG graph goes weird because of 32bit wrapping problem.
So that is to be polled with SNMPv2c but MS does not support
SNMP v2c.
That's the problem.

Dong

-----Original Message-----
From: emily, amanda [mailto:aemily at colsd.org] 
Sent: Monday, August 19, 2002 1:38 PM
To: dongkkim at ncsoft.net
Cc: mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] server side gigabit LAN card

Two of the servers at work have gigabit fibre cards and I can monitor them
using SNMP.
 
The oid you're looking for is  
.1.3.6.1.2.1.2.2.1.10 (in) 
.1.3.6.1.2.1.2.2.1.16  (out)
 
You may wish to see if SNMP is even installed on your box if you're not
getting anything by polling it.
 
Amanda

	-----Original Message----- 
	From: 김동균 [mailto:dongkkim at ncsoft.net] 
	Sent: Sun 8/18/2002 05:32 PM 
	To: mrtg at list.ee.ethz.ch 
	Cc: 
	Subject: [mrtg] server side gigabit LAN card
	
	


	Hi, folks
	
	My Windows 2K server has a gigabit NIC and generates over 100 Mbps.
	I'd like to draw traffic graph of this box not by polling the
switch.
	(The switch is owned by hosting service company.)
	Windows 2K seems it does not support SNMPv2c. How can I work it out
?
	
	Dong
	
	--
	Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
	Archive     http://www.ee.ethz.ch/~slist/mrtg
	FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
	WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
	
	

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi