[mrtg] Re: cfgmaker problems

[Alan Rader]

I am sitting on a 100mb network with this router.  It has over 400 sub
interfaces spread across s1/0 s1/1 s2/0 and s2/1.  Could that be what it
taking so long?

I did not do the config, but have access to it and below is an example int.

interface Serial2/1.XXX point-to-point
 description PVC to Our Location
 bandwidth 32



Alan Rader
Finish Line, Inc.
Network Administrator
arader at finishline.com
317-899-1022 x3529



-----Original Message-----
From: Aaron Conaway [mailto:Aaron.Conaway at HOSystems.com]
Sent: Tuesday, August 20, 2002 3:20 PM
To: Alan Rader; MRTG
Subject: RE: [mrtg] cfgmaker problems


Alan,

My 3661 with 85 interfaces only took a minute at most.  What kind of
connectivity do you have to the device?

-------------------------------------
Aaron Conaway
Network Engineer III
Verisign, Inc.
http://www.verisign.com


-----Original Message-----
From: Alan Rader [mailto:arader at finishline.com]
Sent: Tuesday, August 20, 2002 4:03 PM
To: 'MRTG'
Subject: [mrtg] cfgmaker problems



Below is command line I am trying to use.

./cfgmaker --show-op-down --no-down --ifref=name --descint --global
'options[_]: growright,bits' --global 'WorkDir:
/usr/local/www/mrtg/tflswitches/3662-2frame' --output
/usr/local/www/mrtg/3662-2frame.cfg mycommunity at X.X.X.X

It is getting stuck and just sits for ever at this point.

--base: Get Device Info on mycommunity at X.X.X.X
--base: Vendor Id: cisco
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifAlias


Any ideas?  In the past I have waited at least 5 minutes after the last line
has popped up.  Could I just not be waiting long enough?  This is for our
main router for our frame network.

Thanks


Alan Rader
Finish Line, Inc.
Network Administrator
arader at finishline.com
317-899-1022 x3529


_________________________________________________________________________
This message and any attachments may be confidential or privileged and are
for the exclusive use of the intended recipient.  If you are not the
addressee or intended recipient, please do not read, copy, use, or disclose
this communication to others.  If you have received this in error, please
notify the sender by replying to this message, and then delete it entirely
from your system.  Delivery of this message and any attachments to any
person other than the intended recipient(s) is not intended in any way to
waive confidentiality or a privilege.  All personal messages express views
only of the sender, which are not to be attributed to Finish Line, and may
not be copied or distributed without this statement.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
_________________________________________________________________________
This message and any attachments may be confidential or privileged and are
for the exclusive use of the intended recipient.  If you are not the
addressee or intended recipient, please do not read, copy, use, or disclose
this communication to others.  If you have received this in error, please
notify the sender by replying to this message, and then delete it entirely
from your system.  Delivery of this message and any attachments to any
person other than the intended recipient(s) is not intended in any way to
waive confidentiality or a privilege.  All personal messages express views
only of the sender, which are not to be attributed to Finish Line, and may
not be copied or distributed without this statement.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi