[mrtg] Re: OID's not working

[Eric VDB]

Paul, tried it but now i get:

C:\mrtg-2.9.22\bin>perl cfgmaker
1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0&1.3.6.1.4.1.3
11.1.1.3.1.1.2.1.3.0:public at xxx.xxx.xxx.xxx >dc01cputest.cfg
--base: Get Device Info on public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0:
Error:
  can't resolve "1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0" to IP address
SNMPGET Problem for public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0:
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because
public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.
0: does not seem to support it
--snpo: Skipping ifDescr scanning because
public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3
.0: does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because
public at 1.3.6.1.4.1.311.1.1.3.1.
1.2.1.3.0: does not seem to support it
--snpo: Skipping ifType scanning because
public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.
0: does not seem to support it
--snpo: Skipping ifPhysAddress scanning because
public at 1.3.6.1.4.1.311.1.1.3.1.1
.2.1.3.0: does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
Error:
  can't resolve "1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0" to IP address
SNMPWALK Problem for public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0:
--base: Walking ifType
Error:
  can't resolve "1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0" to IP address
SNMPWALK Problem for public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0:
--base: Walking ifSpeed
Error:
  can't resolve "1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0" to IP address
SNMPWALK Problem for public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0:
--base: Walking ifAdminStatus
Error:
  can't resolve "1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0" to IP address
SNMPWALK Problem for public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0:
--base: Walking ifOperStatus
Error:
  can't resolve "1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0" to IP address
SNMPWALK Problem for public at 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0:
# Created by
# cfgmaker 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits


######################################################################
# System:
# Description:
# Contact:
# Location:
######################################################################


The filename, directory name, or volume label syntax is incorrect.


I'm totaly lost. Eric


----- Original Message -----
From: "PAUL WILLIAMSON" <pwilliamson at mandtbank.com>
To: <ericvdb500 at hotmail.com>; <mrtg at list.ee.ethz.ch>
Sent: Monday, 26 August, 2002 23:16
Subject: [mrtg] Re: OID's not working


>
> You use cfgmaker to build a config file with default in and out values.
>
> Use that to build a custom target.  The target you are interested in
> is OID1&OID2:community at device.  You'll need to find another
> OID that always returns 0 or use the same one twice.  I usually do
> the latter as it's just easier.
>
> Paul
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi