[mrtg] Re: Graph help

[Brander, Eric]

Your targets don't appear to have a valid instance number, instead they have
a forward slash (/).

 -----Original Message-----
From: 	ewhitwor at centurytel.net [mailto:ewhitwor at centurytel.net] 
Sent:	Tuesday, December 17, 2002 10:58 AM
To:	mrtg at list.ee.ethz.ch
Subject:	[mrtg] Graph help

Hey,

We are having problems with just these graphs showing up correctly. We only 
have this problems on the OC3 circuit. The circuit is fine and has no 
problems. It almost looks like it hits the maxium number of bits and quits 
polling.. but there is data .. just not the correct data. See below:


This is the interface for this router:

### Interface 2 >> Descr: 'POS2/0' | Name: 'PO2/0' | Ip: '65.208.9.98' | 
Eth: '' ###

Target[gw-rt.spt_65.208.9.98]: /65.208.9.98:watchME at gw-rt.spt:
SetEnv[gw-rt.spt_65.208.9.98]: MRTG_INT_IP="65.208.9.98" 
MRTG_INT_DESCR="POS2/0"
AbsMax[gw-rt.spt_65.208.9.98]: 77500000
MaxBytes[gw-rt.spt_65.208.9.98]: 19375000
Title[gw-rt.spt_65.208.9.98]: POS2/0 155 Mbit Sonet/OC3 To Uunet - Dallas 
CID: u64707)
PageTop[gw-rt.spt_65.208.9.98]: <H1>POS2/0 155 Mbit Sonet/OC3 To Uunet - 
Dallas CID: u64707) </H1>
  <TABLE>
    <TR><TD>System:</TD>     <TD>gw-rt.spt.centurytel.net in </TD></TR>
    <TR><TD>Maintainer:</TD> <TD></TD></TR>
    <TR><TD>Description:</TD><TD>POS2/0 155 Mbit Sonet/OC3 To Uunet - 
Dallas CID: u64707) </TD></TR>
    <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
    <TR><TD>ifName:</TD>     <TD>PO2/0</TD></TR>
    <TR><TD>Max Speed:</TD>  <TD>155.0 Mbits/s</TD></TR>
    <TR><TD>Ip:</TD>         <TD>65.208.9.98 
(centurytel-gw.customer.alter.net)</TD></TR>
  </TABLE>


It also does this on the the Gig ethernet interface...

### Interface 5 >> Descr: 'GigabitEthernet0/0' | Name: 'Gi0/0' | Ip: 
'209.206.199.2' | Eth: '00-03-a0-2e-7c-08' ###

Target[gw-rt.spt_209.206.199.2]: /209.206.199.2:watchME at gw-rt.spt:
SetEnv[gw-rt.spt_209.206.199.2]: MRTG_INT_IP="209.206.199.2" 
MRTG_INT_DESCR="GigabitEthernet0/0"
AbsMax[gw-rt.spt_209.206.199.2]: 500000000
MaxBytes[gw-rt.spt_209.206.199.2]: 125000000
Title[gw-rt.spt_209.206.199.2]: GigabitEthernet0/0
PageTop[gw-rt.spt_209.206.199.2]: <H1>GigabitEthernet0/0  </H1>
  <TABLE>
    <TR><TD>System:</TD>     <TD>gw-rt.spt.centurytel.net in </TD></TR>
    <TR><TD>Maintainer:</TD> <TD></TD></TR>
    <TR><TD>Description:</TD><TD>GigabitEthernet0/0  </TD></TR>
    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
    <TR><TD>ifName:</TD>     <TD>Gi0/0</TD></TR>
    <TR><TD>Max Speed:</TD>  <TD>1000.0 Mbits/s</TD></TR>
    <TR><TD>Ip:</TD>         <TD>209.206.199.2 
(rt2.spt.centurytel.net)</TD></TR>
  </TABLE>

Any help would be greatly appreciated.

Thanks,
Emily



Emily Whitworth
CenturyTel Internet Services






-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 6k (6962 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/sptgigweek


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 5k (5544 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/sptgigday


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 5k (5333 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/sptday


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 6k (6355 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/sptweek


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi