[mrtg] Re: Graph help
Alex Nguyen
anguyen at videotron.net
Tue Dec 17 18:30:30 MET 2002
Hi,
You've hit the 32bits counter wrap. Use the 64bits counter for any link
greater than 100Mbps of bandwidth.
Target[gw-rt.spt_65.208.9.98]: /65.208.9.98:watchME at gw-rt.spt:::::2
instead of
Target[gw-rt.spt_65.208.9.98]: /65.208.9.98:watchME at gw-rt.spt:
A.
---------------
On Tue, 17 Dec 2002 ewhitwor at centurytel.net wrote:
Date: Tue, 17 Dec 2002 10:57:47 -0600
From: ewhitwor at centurytel.net
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Graph help
Hey,
We are having problems with just these graphs showing up correctly. We only
have this problems on the OC3 circuit. The circuit is fine and has no
problems. It almost looks like it hits the maxium number of bits and quits
polling.. but there is data .. just not the correct data. See below:
This is the interface for this router:
### Interface 2 >> Descr: 'POS2/0' | Name: 'PO2/0' | Ip: '65.208.9.98' |
Eth: '' ###
Target[gw-rt.spt_65.208.9.98]: /65.208.9.98:watchME at gw-rt.spt:
SetEnv[gw-rt.spt_65.208.9.98]: MRTG_INT_IP="65.208.9.98"
MRTG_INT_DESCR="POS2/0"
AbsMax[gw-rt.spt_65.208.9.98]: 77500000
MaxBytes[gw-rt.spt_65.208.9.98]: 19375000
Title[gw-rt.spt_65.208.9.98]: POS2/0 155 Mbit Sonet/OC3 To Uunet - Dallas
CID: u64707)
PageTop[gw-rt.spt_65.208.9.98]: <H1>POS2/0 155 Mbit Sonet/OC3 To Uunet -
Dallas CID: u64707) </H1>
<TABLE>
<TR><TD>System:</TD> <TD>gw-rt.spt.centurytel.net in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>POS2/0 155 Mbit Sonet/OC3 To Uunet -
Dallas CID: u64707) </TD></TR>
<TR><TD>ifType:</TD> <TD>frame-relay (32)</TD></TR>
<TR><TD>ifName:</TD> <TD>PO2/0</TD></TR>
<TR><TD>Max Speed:</TD> <TD>155.0 Mbits/s</TD></TR>
<TR><TD>Ip:</TD> <TD>65.208.9.98
(centurytel-gw.customer.alter.net)</TD></TR>
</TABLE>
It also does this on the the Gig ethernet interface...
### Interface 5 >> Descr: 'GigabitEthernet0/0' | Name: 'Gi0/0' | Ip:
'209.206.199.2' | Eth: '00-03-a0-2e-7c-08' ###
Target[gw-rt.spt_209.206.199.2]: /209.206.199.2:watchME at gw-rt.spt:
SetEnv[gw-rt.spt_209.206.199.2]: MRTG_INT_IP="209.206.199.2"
MRTG_INT_DESCR="GigabitEthernet0/0"
AbsMax[gw-rt.spt_209.206.199.2]: 500000000
MaxBytes[gw-rt.spt_209.206.199.2]: 125000000
Title[gw-rt.spt_209.206.199.2]: GigabitEthernet0/0
PageTop[gw-rt.spt_209.206.199.2]: <H1>GigabitEthernet0/0 </H1>
<TABLE>
<TR><TD>System:</TD> <TD>gw-rt.spt.centurytel.net in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>GigabitEthernet0/0 </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD>Gi0/0</TD></TR>
<TR><TD>Max Speed:</TD> <TD>1000.0 Mbits/s</TD></TR>
<TR><TD>Ip:</TD> <TD>209.206.199.2
(rt2.spt.centurytel.net)</TD></TR>
</TABLE>
Any help would be greatly appreciated.
Thanks,
Emily
Emily Whitworth
CenturyTel Internet Services
-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 6k (6962 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/sptgigweek
-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 5k (5544 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/sptgigday
-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 5k (5333 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/sptday
-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 6k (6355 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/sptweek
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list