[mrtg] Re: scripts to take 5% off the utilization stats
Mitchell K. Smith
mksmith at pa.eplus.com
Tue Dec 17 18:51:41 MET 2002
Actually you hit the nail on the head.
I was hoping someone would admit to doing this.
Have you documented the procedure for manually updating the
MRTG code? Would you be willing to share it?
We run the 2.9.26 version. The last time I tried to manually
change the MRTG code, I still couldn't get it to work.
I am not a programmer so I'm not sure what I did wrong.
Thanks a bunch.
Mitch
-----Original Message-----
From: Barry_Young at interliant.com [mailto:Barry_Young at interliant.com]
Sent: Tuesday, December 17, 2002 12:41 PM
To: Mitchell K. Smith
Cc: Jeff Gong; mrtg at list.ee.ethz.ch; mrtg-bounce at list.ee.ethz.ch
Subject: Re: [mrtg] Re: scripts to take 5% off the utilization stats
Please excuse me if I have missed some of this thread, but I believe 95th
percentile can be integrated into mrtg. I am presently running v2.9.22 and
have patched the mrtg code to displayed the data collected by the 95.pl
script.
I admit I manually edited the mrtg code rather than use the patching
utility, but it follows the same approach. (ie. firstly open the
'target'.95 file and then include the data into the html, fairly
straightforward script comparissons).
One the whole this seems to work pretty well, so much so that we will be
using this to refine our billing approach.
HTH
Regards,
"Mitchell K.
Smith" To: "Jeff Gong" <jgong at torontohydro.com>, <mrtg at list.ee.ethz.ch>
<mksmith at pa.eplu cc:
s.com> Subject: [mrtg] Re: scripts to take 5% off the utilization stats
Sent by:
mrtg-bounce at list
.ee.ethz.ch
17/12/2002 17:14
Okay, let me try again.
1. Read the documentation.
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/reference.html
Look at the avgpeak option.
2. Read this http://www.seanadams.com/95/
The 95.pl script collects the data. However, there is no solution for
integrating the
data into the new versions of MRTG. This solution only works with the
2.9.10 version of MRTG.
Hope this helps.
Mitch
-----Original Message-----
From: Jeff Gong [mailto:jgong at torontohydro.com]
Sent: Tuesday, December 17, 2002 11:06 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] scripts to take 5% off the utilization stats
Hi,
I noticed that ISP use MRTG to gather utilization stats, and take the
top 5% off, then charge for the remaining highest. I got a MRTG at my
end, but I don't know how to take the top 5% off the utilization stats.
Is there any script to do this?
Thank you in advance.
Jeff
>>> "Brander, Eric" <Eric.Brander at ACS-INC.com> 12/17/02 10:15AM >>>
Are you certain you have SNMP enabled and that "public" is the correct
RO
string? My 4006 is running IOS so the command is different, but this
is
what I use:
snmp-server community public RO
-----Original Message-----
From: Jean-Hugues BELPOIS
[mailto:Jean-Hugues.Belpois at univ-brest.fr]
Sent: Tuesday, December 17, 2002 2:32 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: cisco4006
All the router are running CatOS, but when I try to use cfgmaker as
indicated
(./cfgmaker --ifref=name --ifdesc=descr --descint
--output=/var/mrtg/another
cat.cfg public at 172.30.3.1) it cause the errors messages :
--base: Get Device Info on public at 172.30.3.1
SNMP Error:
no response received
SNMPv1_Session (remote host: "172.30.3.1" [172.30.3.1].161)
community: "public"
request ID: 703847423
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID
on
public at 172.30.3.1
--base: Vendor Id:
--base: Populating confcache
SNMP Error:
no response received
etc..
And a strange thing (for me) that it work fine withe the other routers
3548,
connected to the 4006.
Is anybody got an idea of what is wrong ?
jhb
----- Original Message -----
From: "McDonald, Dan" <Dan.McDonald at austinenergy.com>
To: "'Jean-Hugues BELPOIS'" <Jean-Hugues.Belpois at univ-brest.fr>
Sent: Monday, December 16, 2002 2:00 PM
Subject: RE: [mrtg] cisco4006
Running IOS or CatOS?
Either way, cfgmaker does a fine job with:
./cfgmaker --ifref=name --ifdesc=descr --descint
--output=/var/mrtg/anothercat.cfg public at 10.10.10.10
Daniel J McDonald, CCIE #2495, CNX
Lan/Wan Integrator
Austin Energy
1.512.322.6739
dan.mcdonald at austinenergy.com
-----Original Message-----
From: Jean-Hugues BELPOIS [mailto:Jean-Hugues.Belpois at univ-brest.fr]
Sent: Monday, December 16, 2002 6:17 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] cisco4006
Hello,
Is anybody use mrtg with à cisco 4006 catalyst and can send me an
example
of
his mrtg.cfg file ?
thanks a lot
jhb
----------------------------------------------------------------------------
-------
Jean-Hugues BELPOIS
Département informatique - I.U.P d'ingénierie informatique
U.F.R sciences - Batiment LC
Université de Bretagne Occidentale
20, Avenue Victor Le Gorgeu 29285 Brest Cedex
Tel : 02.98.01.69.70 Fax : 02.98.01.80.11
Mail : belpois at univ-brest.fr
----------------------------------------------------------------------------
-------
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list