[mrtg] Re: Multiple Device Monitoring

[Paul Cousins]

just add the new setcions the exsitsting config the refernce.html gives you
all you need to know about what options and parameters there are. once you
have added the new sections remaker the index.html using the indexmaker
heres a sample from mine to give you an idea. obivously yours will differ
but it is simply a case of adding new sections for each device you wish to
monitor. just fiddle around as long as you dont toucj your original entries
yu can do harm of course backup first =)

If the mrgt complier hits an error its really quite explanatory what the
problem is and is quite easy to fix just refer to the reference.html.

Hope this helps

get stuck in  =)


Workdir: d:\stats\frodo\

Title[FRODO-1]:CPU Usage
Pagetop[FRODO-1]: <H1>CPU Usage</H1>
MaxBytes[FRODO-1]: 100
Options[FRODO-1]: gauge,nopercent,nobanner,nolegend
Target[FRODO-1]: `perl c:\mrtg\bin\getlog.pl c:\PerfLogs\FRODO.csv
"\\FRODO\Processor(_Total)\% Processor Time"`
YLegend[FRODO-1]: CPU
ShortLegend[FRODO-1]: CPU
LegendO[FRODO-1]: %
LegendI[FRODO-1]:
Legend2[FRODO-1]:
Legend1[FRODO-1]:

Title[FRODO-2]: ISDN Incoming K/s
Pagetop[FRODO-2]: <H1>ISDN Incoming K/s</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>FRODO in Bedroom</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Paul</TD></TR>
   <TR><TD>Description:</TD><TD>ISDN (Line-1) </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ISDN BRI</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>64K</TD></TR>
   <TR><TD>Ip:</TD>         <TD>Dynamic</TD></TR>
 </TABLE>
MaxBytes[FRODO-2]: 8000
Options[FRODO-2]:  gauge,nopercent,nobanner,nolegend
Target[FRODO-2]: `perl c:\mrtg\bin\getlog.pl c:\PerfLogs\FRODO.csv
"\\FRODO\RAS Port(ISDN10-0)\Bytes Received/Sec"`
YLegend[FRODO-2]: ISDN K/s
ShortLegend[FRODO-2]: B/s
LegendO[FRODO-2]: B/s
LegendI[FRODO-2]:
Legend2[FRODO-2]:
Legend1[FRODO-2]:



----- Original Message -----
From: "Jeroen de Zwart" <Jeroen.deZwart at creativeaction.nl>
To: <mrtg at list.ee.ethz.ch>
Sent: Wednesday, December 18, 2002 10:54 AM
Subject: [mrtg] Re: Multiple Device Monitoring


>
> How about creating different .cfg files and calling them consecutively.
>
> rtr1.cfg
> rtr2.cfg
>
> mrtg rtr1.cfg
> mrtg rtr2.cfg
>
> hope this helps
> ----- Original Message -----
> From: "Adeoba, Adetutu" <Adetutu.Adeoba at intesabci.co.uk>
> To: <mrtg at list.ee.ethz.ch>
> Sent: Wednesday, December 18, 2002 11:20 AM
> Subject: [mrtg] Multiple Device Monitoring
>
>
> >
> > Pleae how can I go about monitoring different devices at the same time
> > without overwriting the mrtg.cfg file?
> >
> > Thanks
> >
> > Adetutu Adeoba
> > Network Analyst
> >
> > IntesaBci S.p.A.. -  London Branch
> > Member of the "Gruppo Intesa" Banking Group
> > 90 Queen St., London, EC4N 1SA
> > Tel. +44. (0(20)) 7651 3271 - fax +44. (0(20)) 7651 3227.
> >  E-mail: adetutu.adeoba at intesabci.co.uk
> >
> > Disclaimer for personal messages: "the information contained herein does
> not
> > necessarily express the opinion or
> > the position of IntesaBci SpA (Intesa) and can not be attributed to or
> made
> > binding upon BCI".
> >
> >
> > --
> > Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> > Archive     http://www.ee.ethz.ch/~slist/mrtg
> > FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> > WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi