[mrtg] Re: Cisco interface numbers

[Sawyer, David]

Have you tried using the interface description, MAC address or IP address in
the target.

I use the Interface Description with no problems.

i.e.

Target[cisco]: \Serial1/0:public at ipaddress
Target[cisco]: OID1\Serial1/0&OID2\Serial1/0:public at ipaddress

If you do use the description remember that it's case sensitive (see docs
for more info)

HTH

Dave

-----Original Message-----
From: Kristjan Thordarson [mailto:kth at hp.is]
Sent: 15 January 2002 14:19
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Cisco interface numbers


Anyone know of a way to work around the way Cisco IOS routers re-arrages
it's interface numbers when it's reloaded?
 
Regards,
Kristjan


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi