[mrtg] Re: Running MRTG as service on W2K server

[Bill Carter]

Not sure of the correct answer, but....

I just installed Firedaemon, pretty cool by the way, I have a BAT file the
executes 4 wperl processes.  This BAT file is launched by the Firedaemon.
In the end I still have 4 wperl processes still using about 8Mb each.

I would be interested in know if I combined .cfg files and reduced my wperl
process down to 2, would the 2 processes use 8Mb each or 16Mb???

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Jason Couch
Sent: Wednesday, January 16, 2002 2:28 PM
To: 'warren, anthony'; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Running MRTG as service on W2K server



Will running MRTG as a service take care of the excessive memory
requirements that are evident when running each config file with wperl?

Each wperl instance uses approx 8MB currently on my box and I would like
to cut this down.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of warren, anthony
Sent: Wednesday, January 16, 2002 12:31 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: Running MRTG as service on W2K server


Hi

I run MRTG on Win2k as a service with no problems. I would recommend
using a
free program called Firedaemon to create the service. I have found it to
be
far better than SRVANY. It is available from http://www.firedaemon.com

Also on that site is instructions for turning MRTG into a service.

To get it running at the required 5 min interval just make sure the
following lines in your MRTG cfg file.
RunAsDaemon:yes
Interval:5

If you wan't any more questions answered either post to the list or
email
me.
HTH

Regards,
Anthony

Anthony Warren
Principal Network Engineer
Medway Council
anthony.warren at medway.gov.uk

-----Original Message-----
From: Soden, David [mailto:dsoden at cov.com]
Sent: 16 January 2002 17:23
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Running MRTG as service on W2K server



I currently have mrtg 2.9.17 running on a Windows 2000 server and
it works fine but I'd like to run the process as a service instead
of as a CMD executable.  So far, I have successfully created a
service using the SRVANY.EXE tool from the Windows 2000 Resource
Kit but it only creates the webpages once upon initial startup of
the service.  I am looking for the 5 minute interval that I get
when I execute the CMD file manually.

Has anyone had any success running mrtg as a service on a Windows
2000 server?  Any hints suggestions would be greatly appreciated.
Again, all works great if I just run it from the CMD line.

Thanks,

David Soden

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi