[mrtg] Re: monitoring windows 2000 cpu

john.hoffman at za.pwcglobal.com john.hoffman at za.pwcglobal.com
Fri Jan 25 10:04:31 MET 2002



Try the following OID for W2K CPU.

#Windows 2000 processor utilization
#.1.3.6.1.2.1.25.3.3.1.2.*   (* may be 1, 2, 3, 4, depending on the
instance of you're cpu's).
Target[Server001.cpu]:1.3.6.1.2.1.25.3.3.1.2.2&1.3.6.1.2.1.25.3.3.1.2.3:community at X.X.X.X

Take a look at
http://snmpboy.rte.microsoft.com/

Regards
John


                                                                                                                      
                    Pradeep Agrawal                                                                                   
                    <pa_kota at yahoo.co      To:      mrtg at list.ee.ethz.ch                                              
                    m>                     cc:                                                                        
                    Sent by:               Subject:      [mrtg] monitoring windows 2000 cpu                           
                    mrtg-bounce at list.                                                                                 
                    ee.ethz.ch                                                                                        
                    2002/01/25 02:53                                                                                  
                    AM                                                                                                
                                                                                                                      
                                                                                                                      
                                                                                                                      



 Size: 10 Kb


Trying to monitor windows 2000 server for CPU utalization.
Got following error.

E:\installed\mrtg-2.9.17\bin>perl mrtg testcpu.cfg
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)
SNMPv1_Session (remote host: "10.192.18.229" [10.192.18.229].161)
                  community: "public"
                 request ID: 459743056
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at E:/installed/mrtg-2.9.17/bin\..\lib\mrtg2/SNMP_util.pm line 450
SNMPGET Problem for 1.3.6.1.2.1.25.3.3.1.2.1 1.3.6.1.2.1.25.3.3.1.2.1
sysUptime
sysName on public at 10.192.18.229:
 at mrtg line 1491
WARNING: Expected a number but got ''
WARNING: Expected a number but got ''


Here is my cfg file

# Created by

# cfgmaker --host-template=cput.pl public at 10.192.18.229 --global 'WorkDir
c:\inetpub\wwwroot\mrtg\testcpu' --output testcpu.cfg



### Global Config Options

# for UNIX

# WorkDir: /home/http/mrtg

# or for NT

# WorkDir: c:\mrtgdata

### Global Defaults

# to get bits instead of bytes and graphs growing to the right

# Options[_]: growright, bits



######################################################################

# System: PAGRAWALL2KS

# Description: Hardware: x86 Family 6 Model 8 Stepping 10 AT/AT COMPATIBLE
- Software: Windows 2000 Version 5.0 (Build 2195 Uniprocessor Free)

# Contact: Pradeep Agrawal

# Location: 1-1-115

######################################################################

#

YLegend[10.192.18.229.cpu]: Percentage CPU load

ShortLegend[10.192.18.229.cpu]: %

Legend1[10.192.18.229.cpu]: CPU load in %

Legend2[10.192.18.229.cpu]:

Legend3[10.192.18.229.cpu]: Max Observed CPU load

Legend4[10.192.18.229.cpu]:

LegendI[10.192.18.229.cpu]: &nbsp;CPU Load:

LegendO[10.192.18.229.cpu]:

WithPeak[10.192.18.229.cpu]: ywm

MaxBytes[10.192.18.229.cpu]: 100

Options[10.192.18.229.cpu]: growright, gauge, nopercent

Title[10.192.18.229.cpu]: 10.192.18.229 CPU load

Target[10.192.18.229.cpu]:
1.3.6.1.2.1.25.3.3.1.2.1&1.3.6.1.2.1.25.3.3.1.2.1:public at 10.192.18.229:

PageTop[10.192.18.229.cpu]: <H1>10.192.18.229 CPU load</H1>

<TABLE>

<TR><TD>System:</TD><TD>10.192.18.229 in 1-1-115</TD></TR>

<TR><TD>Maintainer:</TD><TD>Pradeep Agrawal</TD></TR>

<TR><TD VALIGN="top">Description:</TD><TD>Hardware: x86 Family 6 Model 8
Stepping 10 AT/AT COMPATIBLE - Software: Windows 2000 Version 5.0 (Build
2195 Uniprocessor Free)</TD></TR>

<TR><TD>Resource:</TD><TD>CPU.</TD></TR>

</TABLE>



### Interface 1 >> Descr: 'MS TCP Loopback interface&#0;' | Name: '' | Ip:
'127.0.0.1' | Eth: '' ###

### The following interface is commented out because:

### * it is a Software Loopback interface

#

# Target[10.192.18.229_1]: 1:public at 10.192.18.229:

# SetEnv[10.192.18.229_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="MS TCP
Loopback interface&#0;"

# MaxBytes[10.192.18.229_1]: 1250000

# Title[10.192.18.229_1]: Traffic Analysis for 1 -- PAGRAWALL2KS

# PageTop[10.192.18.229_1]: <H1>Traffic Analysis for 1 -- PAGRAWALL2KS</H1>

# <TABLE>

# <TR><TD>System:</TD> <TD>PAGRAWALL2KS in 1-1-115</TD></TR>

# <TR><TD>Maintainer:</TD> <TD>Pradeep Agrawal</TD></TR>

# <TR><TD>Description:</TD><TD>MS TCP Loopback interface&#0; </TD></TR>

# <TR><TD>ifType:</TD> <TD>softwareLoopback (24)</TD></TR>

# <TR><TD>ifName:</TD> <TD></TD></TR>

# <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR>

# <TR><TD>Ip:</TD> <TD>127.0.0.1 (pagrawall2ks)</TD></TR>

# </TABLE>



### Interface 16777219 >> Descr: '3Com 10/100 Mini PCI Ethernet
Adapter&#0;' | Name: '' | Ip: '10.192.18.229' | Eth: '00-01-03-8b-0b-4a'
###

Target[10.192.18.229_16777219]: 16777219:public at 10.192.18.229:

SetEnv[10.192.18.229_16777219]: MRTG_INT_IP="10.192.18.229" MRTG_INT_DESCR
="3Com 10/100 Mini PCI Ethernet Adapter&#0;"

MaxBytes[10.192.18.229_16777219]: 12500000

Title[10.192.18.229_16777219]: Traffic Analysis for 16777219 --
PAGRAWALL2KS

PageTop[10.192.18.229_16777219]: <H1>Traffic Analysis for 16777219 --
PAGRAWALL2KS</H1>

<TABLE>

<TR><TD>System:</TD> <TD>PAGRAWALL2KS in 1-1-115</TD></TR>

<TR><TD>Maintainer:</TD> <TD>Pradeep Agrawal</TD></TR>

<TR><TD>Description:</TD><TD>3Com 10/100 Mini PCI Ethernet Adapter&#0;
</TD></TR>

<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>

<TR><TD>ifName:</TD> <TD></TD></TR>

<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>

<TR><TD>Ip:</TD> <TD>10.192.18.229 (pagrawall2ks)</TD></TR>

</TABLE>

WorkDir: c:\inetpub\wwwroot\mrtg\testcpu



Regards

Pradeep Agrawal


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi




----------------------------------------------------------------
        The information transmitted is intended only for the person or
        entity to which it is addressed and may contain confidential and/or
        privileged material.  Any review, retransmission, dissemination or
        other use of, or taking of any action in reliance upon, this
        information by persons or entities other than the intended
        recipient is prohibited.   If you received this in error, please
        contact the sender and delete the material from any computer.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list