[mrtg] Re: Hi all !

Niels Stoltze nis at connectpartner.dk
Thu Jun 13 09:27:53 MEST 2002



Could you please explain your scenario a little bit more? And why is it,
that you explicit wan't to monitor the switch? Instead of the router?

/Stoltze

-----Oprindelig meddelelse-----
Fra: Mihai Barbulescu [mailto:mihai at roedu.net]
Sendt: 13. juni 2002 09:02
Til: Niels Stoltze
Emne: Re: [mrtg] Re: Hi all !


No because in that switch are more than one client.And i'm intersted
just
in one from that switch port.The switch is connected to a linux machine
and
i'm doing snmp on switch  .
 Thx
On Thu, Jun 13, 2002 at 07:58:06AM +0200, Niels Stoltze wrote:
> 
> Hi Mihai,
> 
> I guess, that the port on the switch, is connected to a router, with a
> WAN connection of 256Kbit. If you have access to the router, then you
> could just monitor the WAN-port... If it supports SNMP...
> 
> Regards,
> /Stoltze
> 
> -----Oprindelig meddelelse-----
> Fra: Mihai Barbulescu [mailto:mihai at roedu.net]
> Sendt: 12. juni 2002 22:53
> Til: mrtg at list.ee.ethz.ch
> Emne: [mrtg] Hi all !
> 
> 
> 
>  Hi all !
>   I am new here.....
> 
>   And i've comed with a question.Let's say that i 'm an internet
> provider.So i have
> linux on a machine wich runs MRTG-2.9.17 and i have a CISCO switch.I
> monitor 
> one port from a switch with mrtg.So my output will be their INPUT.The
> interface
> from the switch has 10 Mbits/s.So look what i whant....I whant the
> trafic 
> wich is more than 256 Kbits/sec to not be displayed on mrtg graph.So
my 
> OUTPUT will stay at 256 Kbits/sec even the total trafic si more
.......
>  So plz help me...I've tried with optin 
> MAX BYTES but i think that is working only for input....
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list