[mrtg] Re: 3com Switch 1100 - VLAN in log file?

[Trent Melcher]

Check your OIDs again.

Second one is 1.3.6.1.2.1.2.2.1.2.65
shouldn't it be 1.3.6.1.2.1.2.2.1.2.16.65

Trent

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=
    Trent Melcher  (tmelcher at trilogytel.com)
            StarTouch International
         Network/System Administrator
            Phone:402.346.3600x103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Adam Crosby
Sent: Thursday, March 14, 2002 2:28 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] 3com Switch 1100 - VLAN in log file?



Hi,
    I attempting to chart inOctets/inErrors, and outOctets/outErrors using
the RMON OIDs
 (1.3.6.1.2.1.2.2.1.10 , 1.3.6.1.2.1.2.2.1.14, 1.3.6.1.2.1.2.2.1.16, and
1.3.6.1.2.1.2.2.1.2 respectively).  I'm charting a 3Com 1100 Switch, from a
Redhat Linux 7.2 box.  Here's a copy of a section of the config -
#----------------------------------
 WorkDir: /var/www/html/stats/switch
 IconDir: ../mrtgicons
 Interval: 5
 Title[^]:

 Background[Port65]: #8080808
 Target[Port65]:1.3.6.1.2.1.2.2.1.10.65&1.3.6.1.2.1.2.2.1.14.65:<comstr@<add
 MaxBytes[Port65]: 3000000
 Title[Port65]: Switch 1100
 PageTop[Port65]: <H2Total / Error incoming ratio (in/out) </H2
 Options[Port65]: gauge, nopercent
 Unscaled[Port65]: m
 Supress[Port65]: y
 XSize[Port65]: 380
 YSize[Port65]: 100
 YLegend[Port65]: packets
 ShortLegend[Port65]: &nbsp
 Legend1[Port65]: In Octets
 Legend2[Port65]: In Errors
 #Legend3[Port65]:
 #Legend4[Port65]:
 LegendI[Port65]:  In Octets:&nbsp
 LegendO[Port65]: In Errors:&nbsp
#----------------------------------
 This section (graphing incoming traffic) works just fine.  However, when I
switch the OID's for the outgoing traffic stats
(1.3.6.1.2.1.2.2.1.16.65&1.3.6.1.2.1.2.2.1.2.65), and leave everything else
the same, it fails with the following error (the outbound target name is
[Port65o]):

 Rateup ERROR: /usr/bin/rateup found port65o's log file was corrupt
           or not in sorted order:
 time: 1015520009.Rateup WARNING: /usr/bin/rateup could not read the primary
log file for port65o
 Rateup WARNING: /usr/bin/rateup The backup log file for port65o was invalid
as well
 Rateup WARNING: /usr/bin/rateup Can't remove port65o.old updating log file

 And Then with this:

 Rateup ERROR: /usr/bin/rateup found port65o's log file was corrupt
           or not in sorted order:
 time: 1015520469.Rateup WARNING: /usr/bin/rateup could not read the primary
log file for port65o
 Rateup ERROR: /usr/bin/rateup found port65o's log file was corrupt
           or not in sorted order:
 time: 1015520469.Rateup WARNING: /usr/bin/rateup The backup log file for
port65o was invalid as well
 WARNING: rateup died from Signal 0
  with Exit Value 1 when doing router 'port65o'
  Signal was 0, Returncode was 1

 I've tried moving it to another directory, I've tried removing all the
'.ok', '.log', and 'old' files as well.  I also noticed that for my
(working) inbound traffic, the log file looks normal:
 1015520402 89722254 0
 1015520402 0 0 0 0
 1015520102 0 0 0 0

 However, after the failed attempt at using the outbound monitor, my
outbound log looks like this:
 1015520469 89804777 RMON VLAN 1
 1015520469 0 0 0 0
 1015520100 0 0 0 0

 I thought maybe the switch was returning non-numeric values for the
outbound OIDs, so i checked with snmpget (from the commandline) and got
this:
 interfaces.ifTable.ifEntry.ifOutOctets.65 = Counter32: 90231367

 So, the switch is answering up properly.

 Any ideas on what's going wrong?  Thanks for any help!


------------------------------------------------
Adam Crosby
District Systems Engineer
Norfolk Public Schools
(757) 628-3450
------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi