[mrtg] Re: bps conversion in % --HELP-- !

Sawyer, David david.sawyer at uk.mckhboc.com
Mon Mar 18 15:24:28 MET 2002


Since your sending the error message to the event log you will have to look
there, or remove the --logging=eventlog section and re-run the command from
a DOS prompt.



-----Original Message-----
From: MILAN CLAUDIO [mailto:CLAUDIO.MILAN at sella.it]
Sent: 18 March 2002 14:06
To: 'Sawyer, David'
Cc: 'mrtg at list.ee.ethz.ch'
Subject: R: [mrtg] bps convertion in % --HELP-- !


There isn't a specified message,
the command line that give up my deamon (start /Dc:\mrtg\mrtg-2.9.17\bin
wperl mrtg --logging=eventlog configuration.cfg) give up only for few second
the wperl process (usually this is when the configuration is not correct).

thanks

claudio

-----Messaggio originale-----
Da: Sawyer, David [mailto:david.sawyer at uk.mckhboc.com]
Inviato: lunedì 18 marzo 2002 14.54
A: 'MILAN CLAUDIO'
Cc: 'mrtg at list.ee.ethz.ch'
Oggetto: RE: [mrtg] bps convertion in % --HELP-- !


What is the error message?

Also, you don't need 'WithPeak[]: D' as the day graph is the peaks.

Use this for W, M and/or Y, then the peaks from the day graph will be stored
on the specified graphs.



-----Original Message-----
From: MILAN CLAUDIO [mailto:CLAUDIO.MILAN at sella.it]
Sent: 18 March 2002 13:40


David,
I'm sorry but it isn't the correct way,

I've tried this but the deamon don't working...

### Example - 64kbps ###
Target[EX]: (1:read at 1.1.1.1 * 100) / 64000
WithPeak[EX]: d
Options[EX]: growright, nopercent, gauge
MaxBytes[EX_%]: 100
Title[EX]: Router -
PageTop[Ex]: <H1>Router - 64kbps</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Router-</TD></TR>
   <TR><TD>ifType:</TD>     <TD>FR</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>64 kBits/s</TD></TR>
 </TABLE>


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list