[mrtg] Ethernet interfaces that are unplugged dont show up

[Adam Clark]

When I change:

### Interface 11 >> Descr: 'FastEthernet0/10' | Name: 'Fa0/10' | Ip: '' |
Eth: '00-01-96-55-70-4a' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
# Target[cisco3500-1b_FastEthernet0_10]:
\FastEthernet0/10:public at cisco3500-1b:
# SetEnv[cisco3500-1b_FastEthernet0_10]: MRTG_INT_IP=""
MRTG_INT_DESCR="FastEthernet0/10"
# MaxBytes[cisco3500-1b_FastEthernet0_10]: 0
# Title[cisco3500-1b_FastEthernet0_10]: Traffic Analysis for
FastEthernet0/10 -- cisco3500-1b.nmelb.ngv.vic.gov.au
# PageTop[cisco3500-1b_FastEthernet0_10]: <H1>Traffic Analysis for
FastEthernet0/10 -- cisco3500-1b.nmelb.ngv.vic.gov.au</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>cisco3500-1b.nmelb.ngv.vic.gov.au in
Cabinet 3B</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD>Leon Sayers</TD></TR>
#    <TR><TD>Description:</TD><TD>FastEthernet0/10  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Fa0/10</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>
### Interface 11 >> Descr: 'FastEthernet0/10' | Name: 'Fa0/10' | Ip: '' |
Eth: '00-01-96-55-70-4a' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
 Target[cisco3500-1b_FastEthernet0_10]:
\FastEthernet0/10:public at cisco3500-1b:
 SetEnv[cisco3500-1b_FastEthernet0_10]: MRTG_INT_IP=""
MRTG_INT_DESCR="FastEthernet0/10"
 MaxBytes[cisco3500-1b_FastEthernet0_10]: 12500000
 Title[cisco3500-1b_FastEthernet0_10]: Traffic Analysis for
FastEthernet0/10 -- cisco3500-1b.nmelb.ngv.vic.gov.au
 PageTop[cisco3500-1b_FastEthernet0_10]: <H1>Traffic Analysis for
FastEthernet0/10 -- cisco3500-1b.nmelb.ngv.vic.gov.au</H1>
  <TABLE>
    <TR><TD>System:</TD>     <TD>cisco3500-1b.nmelb.ngv.vic.gov.au in
Cabinet 3B</TD></TR>
    <TR><TD>Maintainer:</TD> <TD>Leon Sayers</TD></TR>
    <TR><TD>Description:</TD><TD>FastEthernet0/10  </TD></TR>
    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
    <TR><TD>ifName:</TD>     <TD>Fa0/10</TD></TR>
    <TR><TD>Max Speed:</TD>  <TD><12.5 MBytes/s/TD></TR>
  </TABLE>


which is: change the max bytes and uncomment like it was an active interface

there is no graph made and the html then decides to come up on the preceding
interfaces web page, ie fast ethernet 0/9

even if I use the unknzero option it still does it.

Is there any way to make these interfaces show up even if they are unplugged


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi