[mrtg] Re: Urgent Help Required-----newbie

[Bill Carter]

i also notice there is a line in the banner without a # proceeding the text
PROM Version.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of PAUL WILLIAMSON
Sent: Friday, May 10, 2002 8:05 AM
To: mrtg at list.ee.ethz.ch; Paul.Curwen at solent.ac.uk
Subject: [mrtg] Re: Urgent Help Required-----newbie



First problem - you have WorkDir defined along with log, html
and imagedir directives.  That won't work.

You need to remove WorkDir and add icondir.  WorkDir is basically
Logdir, htmldir, imagedir and icondir all wrapped up into on directive.

Paul

>>> <Paul.Curwen at solent.ac.uk> 05/10/02 05:55AM >>>

Here is my CFG file

### Global Config Options

WorkDir: c:\mrtgdata
LogDir: c:\mrtgdata\logs
HtmlDir: c:\mrtgdata\html
ImageDir: c:\mrtgdata\images

### Global Defaults

RunAsDaemon:Yes
Interval:5

#  to get bits instead of bytes and graphs growing to the right
Options[_]: growright


############################################################################
#########################
# System: SI-SSR16
# Description: SSR 8600 - Enterasys Networks Firmware Version: E8.2.0.0
PROM Version: prom-E3.1.0.0
# Contact: AIS
# Location: ML305
############################################################################
#########################

 ## Interface 1 >> Descr: 'port number: et.2.1' | Name: 'port number:
et.2.1' | Ip: '' | Eth: '' ###

Target[Staffuser]: 1:mrtg at 194.81.146.1:
SetEnv[Staffuser]: MRTG_INT_IP="" MRTG_INT_DESCR="port number: et.2.1"
MaxBytes[Staffuser]: 12500000
Title[Staffuser]: Traffic Analysis for 1 STAFFUSER SERVER
PageTop[Staffuser]: <H1>Traffic Analysis for STAFFUSER SERVER</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>SI-SSR16 in ML305</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>AIS</TD></TR>
   <TR><TD>Description:</TD><TD>port number: et.2.1  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>Ethernet (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>port number: et.2.1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>100 MBytes/s</TD></TR>
 </TABLE>

Target[Libstaff]:
1.3.6.1.2.1.31.1.1.1.3.9&1.3.6.1.2.1.31.1.1.1.5.9:mrtg at 194.81.146.1:
MaxBytes[Libstaff]: 2500000
YLegend[Libstaff]: Broadcasts
ShortLegend[Libstaff]: Packets
Legend1[libstaff]: Broadcasts Received
Legend2[libstaff]: Broadcasts Transmitted
Legend3[libstaff]: Max Received Broadcasts
Legend4[libstaff]: Max Transmitted Broadcast
LegendI[libstaff]: Received Bcasts
LegendO[libstaff]: Transmitted Bcasts
Title[libstaff]: Broadcast Statistics for Mountbatten Staff Gigabit Feed
PageTop[libstaff]: <H3>SSR 8600 gi 3.1 - Broadcast Statistics</H3>
Options[libstaff]: absolute
Colours[libstaff]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[libstaff]: ymw


I get loads of errors when i run it from a perl cmd prompt

Bareword at line 7  where operator expected and just about every line after
that.

Everything seems alright.....any ideas ???





Paul Curwen
Network Engineer
Networks & Telecomms Team
Southampton Institute

Tel 02380 319985

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi