[mrtg] Re: 7507 CPU Utilization

[Sawyer, David]

Not instead, as well.

Attached is the CPU usage of a 2501 that I will be swapping for a more
powerful device tomorrow, I started monitoring it just yesterday.

If you want to look at the config, let me know.

The result you got from the walk was as expected, the .0 it added was the
instance number of the OID and the 'enterprises' means that your box knew
the OID name for the first section of the OID.


Thanks
Dave

-----Original Message-----
From: Jonathan P Tornea [mailto:jonathan.tornea at d1asia.com]
Sent: 17 May 2002 13:28
To: Sawyer, David; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] 7507 CPU Utilization


Hi,

Thanks, i got it working.  Thanks for pointing out my stupid mistake.  You
think it's better to monitor the usage every 5 seconds instead of every 5
minutes?  How does yours work with 1st oid for 5 sec average and second oid
for 5 min ave?

i made mine both 5 minute average.  i just copied the good manual. :)

anyways, have you any idea about the result i got when i did a snmpwalk?

thanks,

Jonathan P Tornea


-----Original Message-----
From: Sawyer, David [mailto:david.sawyer at mckesson.co.uk]
Sent: Friday, May 17, 2002 8:15 PM
To: 'Jonathan P Tornea'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] 7507 CPU Utilization


MRTG needs two data sources separated by an ampersand '&'.

The only problem with your target is that you need an AT sign '@' between
you community and device not a colon.

I also monitor CPU usage and for my first OID I monitor the 5 second average
which is ..9.2.1.56.0

So my target is...

1.3.6.1.4.1.9.2.1.56.0&1.3.6.1.4.1.9.2.1.58.0:community at router_ip

You should also be using GAUGE in you options.

HTH

David Sawyer

Email: david.sawyer at mckesson.co.uk

 www.geocities.com/mrtg_daemon
   MRTG/RRDTool daemon for Windows9x/ME/2k
   MRTG GUI ConfigMaker for Windows9x/ME/2k


-----Original Message-----
From: Jonathan P Tornea [mailto:jonathan.tornea at d1asia.com]
Sent: 17 May 2002 13:06
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] 7507 CPU Utilization





Hi,

i got this oid (.1.3.6.1.4.1.9.2.1.58 --> cpu utilization over the last five
minutes) from cisco site.  i did a smnpwalk to this oid:

1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:community:router_ip

can anybody shed light.  thanks.


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------


  



-- Attached file removed by Listar and put at URL below --
-- Type: application/octet-stream
-- Size: 5k (5611 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/02-cisco-cpu.png


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi