[mrtg] Re: cfgmaker fails
Mitchell K. Smith
mksmith at pa.eplus.com
Wed Nov 6 13:29:26 MET 2002
Please provide the exact cfgmaker command line that you are using.
-----Original Message-----
From: HexCodEX [mailto:theplague0c at yahoo.es]
Sent: Wednesday, November 06, 2002 7:20 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] cfgmaker fails
Hello
Im trying to configure mrtg with cfgmaker but it fails:
maximus:/usr/share/mrtg/cfg # cfgmaker --global 'WorkDir: /usr/local/httpd/htdocs/mrtg' \
--global 'Options[_]: bits,growright' \
--ifref=ip \
--output /usr/share/mrtg/cfg/mrtg.cfg \
public at verminaard.es
--base: Get Device Info on public@ :
Error:
can't resolve " " to IP address
SNMPGET Problem for public@ :
--base: Vendor Id:
--base: Populating confcache
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
--base: Get Interface Info
--base: Walking ifIndex
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
--base: Walking ifType
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
--base: Walking ifSpeed
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
--base: Walking ifAdminStatus
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
--base: Walking ifOperStatus
Error:
can't resolve " " to IP address
SNMPWALK Problem for public@ :
# Created by
# /usr/bin/cfgmaker --global 'WorkDir: /usr/local/httpd/htdocs/mrtg' --global 'Options[_]: bits,growright' --ifref=ip ' '
WorkDir: /usr/local/httpd/htdocs/mrtg
Options[_]: bits,growright
######################################################################
# System:
# Description:
# Contact:
# Location:
######################################################################
--output: command not found
i dont know whats happening
snmpd seems to work well:
maximus:/usr/share/mrtg/cfg # snmpwalk verminaard.es public system
system.sysDescr.0 = Efficient Networks SpeedStream 5660 Router 2.2.1(9R1) Jun 6 2001 10:18:35
system.sysObjectID.0 = OID: enterprises.763.1.5660.2.1
system.sysUpTime.0 = Timeticks: (156898865) 18 days, 3:49:48.65
system.sysContact.0 = El Gallo
system.sysName.0 = verminaard
system.sysLocation.0 = El Gallinero
system.sysServices.0 = 79
thanks for the replies
Regards!
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list