[mrtg] Re: Max Speed on Cisco

[Alex Ponnath]

I tried that but it seems the system ignores the bandwith setting
In the cisco config....

-----Original Message-----
From: Alex Nguyen [mailto:anguyen at videotron.net] 
Sent: Friday, October 04, 2002 1:13 PM
To: Alex Ponnath
Cc: mrtg at list.ee.ethz.ch
Subject: Re: [mrtg] Max Speed on Cisco


Hi,

I don't know if you have the option "bandwidth" on your PVC as the
802.1Q subinterface. The bandwidth option correspond to the ifSpeed's
value that MRTG use.

A.

On Fri, 4 Oct 2002, Alex Ponnath wrote:

AP> Date: Fri, 04 Oct 2002 12:44:15 -0700
AP> From: Alex Ponnath <alexp at iccinternet.com>
AP> To: mrtg at list.ee.ethz.ch
AP> Subject: [mrtg] Max Speed on Cisco
AP> 
AP> Hi,
AP>  
AP> i was looking in the archives with no look to see if there is a 
AP> solution for my problem. I am terminating T-1's on a CBX 500 which 
AP> then terminates the PVC's of a customer
AP> on OC-3 or DS-3 trunks on a cisco. I dont have a problem graphing
them,
AP> but i have 
AP> a problem with the max speed. Since the loop to customer is a T-1
and
AP> terminates 
AP> on OC-3 cfgmaker detects the OC-3 speed at 155 MB which is correct
but i
AP> would like
AP> to actualy tell mrtg that this PVC's max speed is only 1.5 MB
AP>  
AP> So my question is there any setting in a cisco config or something 
AP> else, which allows me to define this max speed to 1.5 MB. Editing 
AP> the file on daily basis is not realy an
AP> option since there is well over 1000 lines we monitor
AP>  
AP> thanks
AP>  
AP> Alex
AP> 
AP> --
AP> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
AP> Archive     http://www.ee.ethz.ch/~slist/mrtg
AP> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
AP> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
AP> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi