[mrtg] Re: Backplane OID

[PAUL WILLIAMSON]

At a minimum, use something like GetIf or snmpget to determine if that 
is the right OID.  Also, just graph the backplane twice and then maybe 
use Options: noo or noi to suppress one of the colors.

I have a feeling the OID may have a .0 on the end.

Paul

>>> "Luke Scollan1" <SCOLLANL at ie.ibm.com> 10/10/02 10:02AM >>>

I am trying to graph the backplane util of a 4006 cisco switch.  everywhere
i read that when OID's are used they should be used in twos with an '&' in
between them but I dont know what other OID to use with the backplane OID.

The OID I am using for the backplane is

Target[IP Address]: 1.3.6.1.4.1.9.5.1.1.8:'Community String'@'IP address'

Can you shed any light on whether this is the right OID and what other OID
I should use with this one to graph the utilization.
Thanks in advance

Cheers,
Luke

Networking Specialist,
Server 1, 1-F.C5,
IBM Technology Campus,
Damastown Industrial Park,
Dublin 15,
Ireland

Internal        :    12415
External       :    +353-1-815-2415
Internet        :    scollanl at ie.ibm.com 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi