[mrtg] Re: cpu util on a 5509 cisco switch

[McDonald, Dan]

You have to select the proper instance.  Try .9  --  it's .0 on the routers,
and usually .9 on CatOS.
But that will only work if you have newer code.

The other question is - why bother?  CPU on the 5500 is about the most
useless thing - that just tells you how much network management is going on.
The real work of the box is happening on the EARL chip, and there are no
monitors for that.


Daniel J McDonald, CCIE #2495, CNX
Lan/Wan Integrator
Austin Energy
1.512.322.6739
dan.mcdonald at austinenergy.com


-----Original Message-----
From: Ralf van Dooren [mailto:ralf.van.dooren at asml.com]
Sent: Thursday, October 24, 2002 7:59 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] cpu util on a 5509 cisco switch



Has anybody been succesfull in getting the cpu load from a Cisco 5509
switch? I've searched through the archive of various lists, but haven't
able to come up with a solution.

I tried various OID's, like the one found in de CISCO-PROCESS-MIB and
one found at

http://www.cisco.com/warp/public/126/HAS_baseline.html#catalystmibs

They all don't work.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi