[mrtg] Re: Puzzled !!

Gonzalez, Jorge H. jorge.gonzalez at co.unisys.com
Fri Oct 25 17:04:37 MEST 2002


If you're monitoring a Cisco Router and this is a Serial interface the
Default Bandwidth is 1544, 

you can change it with this command:

Enable
Config T
Interface Serial XX
Bandwith 265 (bandwith in Kilobits per seconds)

Jorge Hto Gonzalez
CCIE 6525

-----Mensaje original-----
De: Koelstra, J. (Jan) [mailto:JKoelstra at MINSZW.NL]
Enviado el: Viernes, 25 de Octubre de 2002 09:58 a.m.
Para: Leandro Nicoletti; mrtg at list.ee.ethz.ch
Asunto: [mrtg] Re: Puzzled !!



Leandro,

The percentage figure for a target is calculated as follows: Current
value / Maximum value * 100%
The maximum value is obtained from the mrtg config file (the
Maxbytes[...] line)

If you used configmaker to generate your config file then the Maxbytes
value was obtained by an snmp request to the host you are monitoring. So
if you did not configure snmp correctly you can get unexpected
percentage values.

Jan.


-----Original Message-----
From: Leandro Nicoletti [mailto:leandro_nicoletti at yahoo.co.uk] 
Sent: Friday, October 25, 2002 4:40 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Puzzled !!




Can anyone tell me what the percentage figure is
trying to tell me when monitoring bandwidth
utilization??

Thanks,


Max  In: 198.9 kb/s (2.0%) 

__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts http://uk.my.yahoo.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list