[mrtg] D-Link DGS-3208TG
markku.leinio at dc.turkuamk.fi
Mon Sep 9 14:55:24 MEST 2002
We are having some problems with D-Link DGS-3208TG gigabit switch and MRTG.
Everything seems to be fine, cfgmaker did its job and found all 8
ports/slots (1-6 are 1000Base-T, 7 and 8 are GBIC slots, 7 has a
1000Base-SX module fitted) and detected them as 125 MBps.
However, graphs are showing under 200 bytes per second, even if data is
transferred constantly over that switch.
Is anyone aware of this kind of problem with that particular switch? I have
heard about some difficulties with D-Link hubs and switches, but those have
been old devices.
MRTG version is 2.9.22. Configuration (detected by cfgmaker) is like following:
### Interface 1 >> Descr: 'Net 1 interface' | Name: '' | Ip: '' | Eth: '' ###
Target[tr334_1]: 1:public at tr334:
SetEnv[tr334_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Net 1 interface"
Title[tr334_1]: Traffic Analysis for 1 -- D-Link DGS-3208TG
PageTop[tr334_1]: <H1>Traffic Analysis for 1 -- D-Link DGS-3208TG</H1>
<TR><TD>System:</TD> <TD>D-Link DGS-3208TG in 334</TD></TR>
<TR><TD>Maintainer:</TD> <TD>mleinio at dc.turkuamk.fi</TD></TR>
<TR><TD>Description:</TD><TD>Net 1 interface </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>Max Speed:</TD> <TD>125.0 MBytes/s</TD></TR>
I have used the same default pattern (cfgmaker, edit, indexmaker, crontab)
with our other hardware (3Com, Alcatel, HP) with no problems for years, so
is D-Link implementing something differently?
Markku Leiniö <markku.leinio at dc.turkuamk.fi>
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
More information about the mrtg