[mrtg] Monitoring OperStatus

[jacc]

Hi, I want to  monitoring the OperStatus from an Interface., but something is wrong... Please help me..
The config file is:


Target[172.26.103.2_2695]: 2695:public at 172.26.103.2:
SetEnv[172.26.103.2_2695]: MRTG_INT_IP="172.26.115.101" MRTG_INT_DESCR="2695 ; 3746 CLP Interface"
MaxBytes[172.26.103.2_2695]: 4000
Title[172.26.103.2_2695]: Traffic Analysis for 2695 -- CONFIGURATION NAME: Banco de Guayaquil 0016  , FQN: ECIBMHH1.CP3746 
PageTop[172.26.103.2_2695]: <H1>Traffic Analysis for 2695 -- CONFIGURATION NAME: Banco de Guayaquil 0016  , FQN: #ECIBMHH1.CP3746 </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>CONFIGURATION NAME: Banco de Guayaquil 0016  , FQN: ECIBMHH1.CP3746  in Banco Guayaquil, #Guayaquil-Ecuador,  ,  , 5floor,  </TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Jose Calderon, 593-04-517100,                                 </TD></TR>
   <TR><TD>Description:</TD><TD>2695 ; 3746 CLP Interface  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>2695 ; 3746 CLP Interface</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>4000.0 Bytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.26.115.101 ()</TD></TR>
 </TABLE>


Target[updown]: ifOperStatus.2695&ifAdminStatus.2695:public at 172.26.103.2:

MaxBytes[updown]: 2
Title[updown]: Operational Status for Cir router
PageTop[updown]: <H1>Operational Status for Cir Router</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Prueba cir in Guayaquil</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>José Calderón C.</TD></TR>
   <TR><TD>Description:</TD><TD>Wan 1 Operational Status</TD></TR>
   <TR><TD>ifType:</TD>     <TD>Frame Relay Interface</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   
   <TR><TD>Ip:</TD>         <TD>172.26.115.102 ()</TD></TR>
 </TABLE>


ThreshMaxI[updown]: 1
ThreshProgI[updown]: c:\mrtg-2.9.25\bin\mailalert.bat
ThreshProgOKI[updown]: c:\mrtg-2.9.25\bin\mailok.bat


I obtained the correct graphic for the traffic, but the second graphic is in blank, the values in the updown.log file does not change :

1049230123 1 1
1049230123 0 0 0 0
1049229823 0 0 0 0
1049229600 0 0 0 0
1049229300 0 0 0 0
etc:

What is wrong???

Thanks


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi