[mrtg] 14all.cgi

[Baker, Brendon]

Hi Everyone

I'm trying to use 14all.cgi
I'm using my normal mrtg graphs as they are the ones which are pulling the
data to rrdtool
When i specify one of the cfg files in my web browser like so:
http://scully/cgi-bin/14all.cgi?cfg=/etc/mrtg/cfg/fibres/111.cfg
I get the following error:

Script Error
Illegal characters in cfg param: ./
This is what my cfg file looks like:

######################################################################
# System: 111 Campus FIBRE
# Description: MADGE Smart Ringswitch  Hardware version 8.00  Software
version 4.26.00  Copyright (c) Madge Networks Ltd. 1994
# Contact: Installed 06/12/98
# Location: No.2 First Place
######################################################################


### Interface 19 >> Descr: '' | Name: '' | Ip: '10.192.206.1' | Eth:
'00-00-f6-5f-36-13' ###

Target[10.192.206.1_19]: 19:community206.1:
SetEnv[10.192.206.1_19]: MRTG_INT_IP="10.192.206.1" MRTG_INT_DESCR=""
MaxBytes[10.192.206.1_19]: 2000000
Title[10.192.206.1_19]: Traffic Analysis for 19 -- 111 Campus FIBRE
PageTop[10.192.206.1_19]: <H1>Traffic Analysis for 19 -- 111 Campus
FIBRE</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>111 Campus FIBRE in No.2 First
Place</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Installed 06/12/98</TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>iso88025TokenRing (9)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>2000.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.192.206.1 ()</TD></TR>
 </TABLE>


### Interface 20 >> Descr: '' | Name: '' | Ip: '' | Eth: '00-00-f6-5f-36-14'
###

Target[10.192.206.1_20]: 20:community206.1:
SetEnv[10.192.206.1_20]: MRTG_INT_IP="" MRTG_INT_DESCR=""
MaxBytes[10.192.206.1_20]: 2000000
Title[10.192.206.1_20]: Traffic Analysis for 20 -- 111 Campus FIBRE
PageTop[10.192.206.1_20]: <H1>Traffic Analysis for 20 -- 111 Campus
FIBRE</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>111 Campus FIBRE in No.2 First
Place</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Installed 06/12/98</TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>iso88025TokenRing (9)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>2000.0 kBytes/s</TD></TR>
 </TABLE>

Can you not use your mrtg cfg's? Must I then create a new cfg everytime I
add an interface to my existing cfg files?

Regards
Brendon

___________________________________________________________________________________________________


The views expressed in this email are, unless otherwise stated, those of the author and not those
of the FirstRand Banking Group or its management.  The information in this e-mail is confidential
and is intended solely for the addressee. Access to this e-mail by anyone else is unauthorised. 
If you are not the intended recipient, any disclosure, copying, distribution or any action taken or 
omitted in reliance on this, is prohibited and may be unlawful.
Whilst all reasonable steps are taken to ensure the accuracy and integrity of information and data 
transmitted electronically and to preserve the confidentiality thereof, no liability or 
responsibility whatsoever is accepted if information or data is, for whatever reason, corrupted 
or does not reach its intended destination.

                               ________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi