[mrtg] Re: Clarification

[Luz Berger]

Hi Ahmed,

Do you get a response from your router when you use a mib browser ? In other
words, do you get any SNMP response from the router ?

The errors you mention indicate no responses received. Now if it has worked
before, something must have changed. I take it, you have checked all the
obvious. I had problems with my router (SMC Barricade) before. I had to
reboot the router and I was able to get SNMP responses again.

Hope this may help.

Thanks

Luz Berger

-----Original Message-----
From: Ahmed Soliman [mailto:asoliman at nsr.com.eg] 
Sent: Wednesday, April 02, 2003 11:50 AM
To: luz.berger at bergerl.com
Subject: RE: [mrtg] Clarification


Thanks a lot for your contribution;

Yes my device is SNMP enabled, I want to tell you something:

I ran this command and it worked perfect from 10 am till 4 pm yesterday,then
it is stopped and gave me the mentioned problem!!  What do you think?????


Eng. Ahmed Soliman,
National Systems Research,


-----Original Message-----
From: Luz Berger [mailto:luz.berger at bergerl.com]
Sent: Wednesday, April 02, 2003 11:43 AM
To: 'Ahmed Soliman'
Subject: RE: [mrtg] Clarification

Hi Ahmed,

What kind of DSL router are you using ? It must have a SNMP agent in order
to be used with MRTG.

Regards

Luz Berger

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Ahmed Soliman
Sent: Wednesday, April 02, 2003 11:22 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Clarification


Dear all,

When I want to make MRTG for a DSL router ,I couldn't. From the command
prompt I wrote:

C:\mrtg\bin>perl cfgmaker public at 194.79.97.50 --global "WorkDir:
c:\inetpub\wwwroot\xspeed" --output mrtgxspeed.cfg



The following error appears to me:


C:\mrtg\bin>perl cfgmaker public at 194.79.97.50 --global "WorkDir:
c:\inetpub\wwwroot\xspeed" --output mrtgxspeed.cfg

--base: Get Device Info on public at 194.79.97.113:
SNMP Error:
no response received
SNMPv1_Session (remote host: "194.79.97.113" [194.79.97.113].161)
                  community: "public"
                 request ID: -12713913
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPWALK Problem for 1.3.6.1.2.1.1 on public at 194.79.97.113:


What is the problem? thanks



Eng. Ahmed Soliman,
National Systems Research,




DISCLAIMER:
Sample Disclaimer ggg added in a VBScript.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



DISCLAIMER:
Sample Disclaimer ggg added in a VBScript.



DISCLAIMER:
Sample Disclaimer ggg added in a VBScript.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi