[mrtg] Re: Thresholds

Baker, Brendon BBaker at fnb.co.za
Tue Apr 8 14:51:29 MEST 2003 

Hi Michael

Thanks for all your help

One last question. Is there a way to specify an external mail address in the
script? Should I change the $emailuser to a full email address. 

Thanks for all your patience

Regards
Brendon

-----Original Message-----
From: Michael Markstaller [mailto:mm at elabnet.de]
Sent: 08 April, 2003 13:03
To: mrtg at list.ee.ethz.ch; Baker, Brendon
Subject: [mrtg] Re: Thresholds


Hi,

yes, these are global options which saves each of them to be added per host.

You only have to add each threshold per target where you want thresholds to
be active then, 
an examle for monitoring CPU and mem on a Cisco router looks somethink like
this:
########################### Router-specific
Target[HOSTNAME.cpu]:
1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0:COMMUNITY at HOSTNAME
Directory[HOSTNAME.cpu]: HOSTNAME
MaxBytes[HOSTNAME.cpu]: 100
Title[HOSTNAME.cpu]: CPU Usage -- HOSTNAME
PageTop[HOSTNAME.cpu]: <H1>CPU Usage -- HOSTNAME</H1>
Options[HOSTNAME.cpu]: gauge, absolute
Unscaled[HOSTNAME.cpu]: dwmy
#Supress[HOSTNAME.cpu]:dwmy
XSize[HOSTNAME.cpu]: 380
YSize[HOSTNAME.cpu]: 100
YLegend[HOSTNAME.cpu]: CPU Usage (%)
ShortLegend[HOSTNAME.cpu]: %
Legend1[HOSTNAME.cpu]: CPU Usage 1 min&nbsp;
Legend2[HOSTNAME.cpu]: CPU Usage 5 min&nbsp;
LegendI[HOSTNAME.cpu]: CPU Usage 1 min&nbsp;
LegendO[HOSTNAME.cpu]: CPU Usage 5 min&nbsp;
ThreshMaxO[HOSTNAME.cpu]: 90
#---------------------------------------------------------------
Target[HOSTNAME_freemem]:
1.3.6.1.4.1.9.9.48.1.1.1.6.1&1.3.6.1.4.1.9.9.48.1.1.1.6.2:COMMUNITY at HOSTNAME
Directory[HOSTNAME_freemem]: HOSTNAME
MaxBytes[HOSTNAME_freemem]: 64000000
AbsMax[HOSTNAME_freemem]: 64000000
Title[HOSTNAME_freemem]: Free Memory -- HOSTNAME
PageTop[HOSTNAME_freemem]: <H1>Free Memory -- HOSTNAME</H1>
Options[HOSTNAME_freemem]: gauge, nopercent
#Unscaled[HOSTNAME_freemem]: dwmy
YLegend[HOSTNAME_freemem]: Free Memory
ShortLegend[HOSTNAME_freemem]: B
LegendI[HOSTNAME_freemem]: &nbsp;Proc mem:
LegendO[HOSTNAME_freemem]: &nbsp;I/O mem:
Legend1[HOSTNAME_freemem]: Processor memory:
Legend2[HOSTNAME_freemem]: I/O memory:
ThreshMinI[HOSTNAME_freemem]: 1000000
ThreshMinO[HOSTNAME_freemem]: 1000000
#---------------------------------------------------------------

All options are described here
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/reference.html#threshold_che
cking

By the way, I think it would be better to send answers to the list..

Michael

-----Original Message-----
From: Baker, Brendon [mailto:BBaker at fnb.co.za]
Sent: Monday, April 07, 2003 3:16 PM
To: Michael Markstaller
Subject: RE: [mrtg] Thresholds


Hi Michael

Excuse my ignorance
Are all these options below global options? Or must you add the: 
ThreshProgI[_]: /usr/local/mrtg/bin/mrtg_thresh_alert.pl
ThreshProgO[_]: /usr/local/mrtg/bin/mrtg_thresh_alert.pl
ThreshProgOKI[_]: /usr/local/mrtg/bin/mrtg_thresh_alert.pl
ThreshProgOKO[_]:
/usr/local/mrtg/bin/mrtg_thresh_alert.pl......................per host?
Also........is it possible to add a few external addresses (in another
domain) for it to send to? How you would achieve this?

Thanks for all your help

Regards
Brendon

-----Original Message-----
From: Michael Markstaller [mailto:mm at elabnet.de]
Sent: 07 April, 2003 12:58
To: Baker, Brendon; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Thresholds


Hi,

I picked up the attached perl-script somewhere, it worked for me on RH7.1 ..

configured globally in mrtg.cfg looks like this: 

ThreshDir: /var/spool/mrtg
ThreshProgI[_]: /usr/local/mrtg/bin/mrtg_thresh_alert.pl
ThreshProgO[_]: /usr/local/mrtg/bin/mrtg_thresh_alert.pl
ThreshProgOKI[_]: /usr/local/mrtg/bin/mrtg_thresh_alert.pl
ThreshProgOKO[_]: /usr/local/mrtg/bin/mrtg_thresh_alert.pl


Michael

-----Original Message-----
From: Baker, Brendon [mailto:BBaker at fnb.co.za]
Sent: Monday, April 07, 2003 11:04 AM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Thresholds


Hi everyone

Please could someone help me out with a script for linux that will email a
few users when a threshold in mrtg is reached.
I am not much of a programmer at all

Thanks

Regards
Brendon

____________________________________________________________________________
_______________________


The views expressed in this email are, unless otherwise stated, those of the
author and not those
of the FirstRand Banking Group or its management.  The information in this
e-mail is confidential
and is intended solely for the addressee. Access to this e-mail by anyone
else is unauthorised. 
If you are not the intended recipient, any disclosure, copying, distribution
or any action taken or 
omitted in reliance on this, is prohibited and may be unlawful.
Whilst all reasonable steps are taken to ensure the accuracy and integrity
of information and data 
transmitted electronically and to preserve the confidentiality thereof, no
liability or 
responsibility whatsoever is accepted if information or data is, for
whatever reason, corrupted 
or does not reach its intended destination.

                               ________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


____________________________________________________________________________
_______________________


The views expressed in this email are, unless otherwise stated, those of the
author and not those
of the FirstRand Banking Group or its management.  The information in this
e-mail is confidential
and is intended solely for the addressee. Access to this e-mail by anyone
else is unauthorised. 
If you are not the intended recipient, any disclosure, copying, distribution
or any action taken or 
omitted in reliance on this, is prohibited and may be unlawful.
Whilst all reasonable steps are taken to ensure the accuracy and integrity
of information and data 
transmitted electronically and to preserve the confidentiality thereof, no
liability or 
responsibility whatsoever is accepted if information or data is, for
whatever reason, corrupted 
or does not reach its intended destination.

                               ________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

___________________________________________________________________________________________________


The views expressed in this email are, unless otherwise stated, those of the author and not those
of the FirstRand Banking Group or its management.  The information in this e-mail is confidential
and is intended solely for the addressee. Access to this e-mail by anyone else is unauthorised. 
If you are not the intended recipient, any disclosure, copying, distribution or any action taken or 
omitted in reliance on this, is prohibited and may be unlawful.
Whilst all reasonable steps are taken to ensure the accuracy and integrity of information and data 
transmitted electronically and to preserve the confidentiality thereof, no liability or 
responsibility whatsoever is accepted if information or data is, for whatever reason, corrupted 
or does not reach its intended destination.

                               ________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list